Rolled Collar Cuffed Sleeve Tie Waist Dress

Name: Rolled Collar Cuffed Sleeve Tie Waist Dress
Brand: Minerva Patterns
SKU: 4858
Price: 5.00 EUR
Availability: InStock

Pattern #4858

A women's pull-on dress with short cut-on sleeves finished with turned cuffs, a folded roll collar, a gathered skirt with in-seam side pockets and a separate wide belt with ties. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres.

Tech. Description

Rolled Collar Tie-Waist Dress

A women's pull-on dress with short cut-on sleeves finished with turned cuffs, a folded roll collar, a gathered skirt with in-seam side pockets and a separate wide belt with ties.

When To Wear

Spring and summer, for the office or daytime outings.
With flat shoes or sandals; the belt can be left off for a looser shape.

Key Design Features

Silhouette: Loose bodice joined at the waist to a gathered skirt.

Length: About knee length.

Collar: Roll collar sewn into a ring, folded in half lengthwise and set into the neckline, the inner edge topstitched into the seam.

Sleeves: Short, cut in one with the bodice; cuffs sewn into a ring, folded in half and attached to the sleeve edge.

Closure: None; pulls on over the head.

Pockets: In-seam pockets in the side seams of the skirt.

Skirt: Gathered at the top and joined to the bodice; front and back each cut on the fold.

Waist: Separate interfaced belt: a wide band with two narrow tie ends stitched into its sides, tied at the front.

Finishing: Hem turned 3 cm and topstitched.

Level Of Difficulty

Beginner. Few pieces and straight seams: gathers, in-seam pockets, folded collar and cuffs, a turned belt.

Fabric Recommendations

Dress fabrics in natural or blended fibres.

Additional Supplies

Fusible interfacing (belt and ties)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the bottom edge of the dress – 3.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical details). When stitching pieces, pay attention to the notches - they must match!

From main fabric:
- Upper back – 1 piece on fold
- Upper front - 1 piece on fold
- Lower back – 1 piece on fold
- Lower front - 1 piece on fold
- Collar - 1 piece
- Cuff - 2 pieces
- Large belt – 1 piece
- Small belt – 2 pieces
- Pocket bag – 4 pieces
From fusible interfacing:
- Large belt – 1 piece
- Small belt – 2 pieces

Sewing Instructions

Stitch shoulder seams of upper parts. Finish allowances and press towards the back. Stitch side seams simultaneously with the sleeve seam. Finish allowances and press towards the back.
Attach pocket bag to the lower front and back parts. Start and end stitching strictly at the pocket opening markings. Clip allowances at the marks. Stitch pocket lining edges. Stitch side seams of lower parts in two stages: from the top to the beginning of the pocket, and from the pocket downwards. Finish allowances and press towards the back. Along the upper edge of the lower parts, stitch with loosened upper thread and gather.
Stitch upper and lower parts of the dress. Finish allowance and press upwards.
Stitch collar into a loop. Press allowance open. Fold collar in half lengthwise. Attach the outer side of the collar to the neckline. Fold the allowance of the inner side inwards and topstitch into the attachment seam.
Stitch cuff into a loop. Press allowance open. Fold cuff in half lengthwise. Attach the outer side of the cuff to the sleeve. Fold the allowance of the inner side inwards and topstitch into the attachment seam.
Fold the small belt piece in half lengthwise right sides together and stitch along the long and one short side. Trim allowances at corners, turn right side out. Fold the large belt piece in half lengthwise right sides together. Insert the small belt pieces into the large belt, align side edges and stitch the belt, leaving a technological opening. Turn the belt right side out and press. Close the technological opening.
Finish the bottom edge of the dress, press to the wrong side and topstitch.