Hooded Zippered Panel Jacket

Name: Hooded Zippered Panel Jacket
Brand: Minerva Patterns
SKU: 4814
Price: 5.00 EUR
Availability: InStock

Pattern #4814

A women's hip-length lined jacket with a three-piece hood, a separating zipper at the centre front, front and back yokes, princess seams and pockets set into the front princess seams. It combines two fabrics: a jacket fabric and a low-stretch knit. Drafted to your own measurements. Recommended fabric: jacket fabrics made of natural or blended fibres combined with a low-stretch knit; lining fabric.

Tech. Description

Hooded Zippered Panel Jacket

When To Wear

In spring and autumn over T-shirts, sweatshirts and knit tops.
For walks and weekends, with jeans or trousers.

Key Design Features

Silhouette: Semi-fitted, shaped by front and back princess seams.

Length: Hip length.

Collar: No collar; a hood made of two side pieces and a centre panel, with a hood facing in jacket fabric topstitched from the right side. The hood is lined.

Closure: Separating zipper set between the front edge and the front facing.

Sleeves: Long one-piece set-in sleeves; the sleeve seam is sewn in one with the side seam.

Front: Centre fronts and front yokes in jacket fabric, side fronts in knit.

Pockets: Vertical pockets in the front princess seams, each with a small and a large pocket bag.

Back: Yoke in jacket fabric; centre and side back pieces in knit, with princess seams.

Lining: Full lining of the body, sleeves and hood, attached to the facings and hems and turned through an opening in the left side seam.

Level Of Difficulty

Intermediate. Pockets in princess seams, a separating zipper between shell and facing, a lined hood and bagging a full lining.

Fabric Recommendations

Jacket fabrics made of natural or blended fibres combined with a low-stretch knit; lining fabric.

Additional Supplies

Separating zipper
Lining fabric

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance for the garment and sleeve hem — 3 cm, lower edge of the pocket bags — 0 cm, all other seams 1 cm. Attention! Lining pieces are cut from the shell patterns minus the width of the Center Front Facing and the Back Neckline Facing. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

From main fabric (knit):

Center Back – 2 pieces
Side Back – 2 pieces
Side Front – 2 pieces
Sleeve – 2 pieces
Hood – 2 pieces
Center Hood – 1 piece
Large Pocket Bag – 2 pieces
Smaller Pocket Bag – 2 pieces

From main fabric 1 (jacket fabric):

Center Front – 2 pieces
Center Front Facing – 2 pieces
Back Yoke – 1 piece
Front Yoke – 2 pieces
Hood Facing – 1 piece
Back Neckline Facing – 1 piece

From lining fabric:

Center Back – 2 pieces
Side Back – 2 pieces
Side Front – 2 pieces
Sleeve – 2 pieces
Hood – 2 pieces
Center Hood – 1 piece
Center Front – 2 pieces
Back Yoke – 1 piece
Front Yoke – 2 pieces

Sewing Instructions

Place the Smaller Pocket Bag on the right side of the Center Front and stitch along the pocket opening. Clip the allowances at the corners. Turn the pocket bag to the wrong side and press. Lay the Center Front on the Large Pocket Bag and stitch the pocket bag allowances together. Stitch the front princess seam, joining the Side Front to the Center Front. Serge the allowances and press towards the centre. Attach the Front Yoke to the front. Serge the allowance and press upwards.
Stitch the back princess seam, joining the Side Back to the Center Back. Press the allowance towards the centre. Attach the Back Yoke to the back. Press the allowance upwards.
Stitch the shoulder seams. Press the allowances towards the back. Set the Sleeves into the armholes. Stitch the side seams together with the sleeve seams in one go.
Attach the Center Hood to the Hood pieces. Place the Hood Facing on the hood and tack along the outer edge. Fold the allowance of the inner edge of the Hood Facing to the wrong side and topstitch it onto the hood from the right side. Set the hood into the neckline.
Stitch the shoulder seams of the Back Neckline Facing and the Center Front Facings. Set the hood lining into the neckline of the Back Neckline Facing and Center Front Facings.
Place the jacket and the Center Front Facings right sides together, insert the zipper between the layers and stitch along the front edge and the outer edge of the hood. Turn the Center Front Facings to the wrong side. Tack the hood seam allowances of the shell and the lining together.
Stitch the lining pieces together, leaving an opening in the left side seam. Set in the lining Sleeves. Attach the lining to the Back Neckline Facing and Center Front Facings, to the hem of the jacket and to the sleeve hems. Turn the jacket right side out through the opening. Close the opening.