Fabric & Materials
FABRIC RECOMMENDATIONS: jacket fabrics made of natural or blended fibers, low-stretch knitwear. ALSO NEEDED: separating zipper, lining fabric.
CUTTER'S MUST
IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: Hem allowance for the garment and sleeve hem — 3 cm, pocket bag hem — 0 cm, all other seams 1 cm. ATTENTION! Lining fabric pieces are cut according to the main fabric patterns, subtracting the width of the front facing and facing. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED. WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!
- From main fabric (knitwear):
- Center back piece – 2 pieces
- Side back piece – 2 pieces
- Side front piece – 2 pieces
- Sleeve – 2 pieces
- Hood — 2 pieces
- Center hood piece – 1 piece
- Large pocket bag — 2 pieces
- Small pocket bag - 2 pieces
- From main fabric 1 (jacket fabric):
- Center front piece – 2 pieces
- Front facing — 2 pieces
- Back yoke – 1 piece
- Front yoke – 2 pieces
- Hood facing – 1 piece
- Back neckline facing - 1 piece
- From lining fabric:
- Center back piece – 2 pieces
- Side back piece – 2 pieces
- Side front piece – 2 pieces
- Sleeve – 2 pieces
- Hood — 2 pieces
- Center hood piece – 1 piece
- Center front piece – 2 pieces
- Back yoke – 1 piece
- Front yoke – 2 pieces
Sewing Instructions
- Place the small pocket bag on the right side of the center front piece and stitch around the pocket opening. Clip allowances or slash at corners. Turn the pocket bag to the wrong side and press. Place the center front piece on the large pocket bag and stitch the pocket bag allowances. Stitch the front princess seam. Overlock allowances and press towards the center. Attach the yoke to the front. Overlock allowance and press upwards.
- Stitch the back princess seam. Press allowance towards the center. Attach the yoke to the back. Press allowance upwards.
- Stitch shoulder seams. Press allowances towards the back. Set sleeve into armhole. Stitch side seam simultaneously with sleeve seam.
- Attach the center piece to the hood. Place the facing on the hood and secure along the outer edge. Fold the allowance of the inner edge to the wrong side and topstitch onto the hood from the right side. Attach the hood to the neckline.
- Stitch the shoulder seam of the back neckline facing and front facing. Attach the hood lining to the neckline of the facing and front facings.
- Fold the upper garment and front facings right sides together, insert the zipper between the pieces and stitch around the edge of the front opening and the outer edge of the hood. Turn the front facings to the wrong side. Secure the hood attachment allowances together.
- Stitch the lining pieces, leaving an opening in the left side seam. Set in sleeves. Attach the lining to the facing and front facings, to the bottom of the jacket and sleeves. Turn inside out through the technical opening. Close the opening.
