Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4804
#4806

Pattern

Pattern #4805
Tech. Description

Fabric & Materials

FABRIC RECOMMENDATIONS: low-stretch knit fabric made from natural or blended fibers; knit lace fabric. YOU WILL ALSO NEED: knit fusible interfacing.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, THEY INCLUDE SEAM ALLOWANCES. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: all seams 1 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED. WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

  • From main fabric:
    • Back – 1 piece on fold
    • Front – 1 piece on fold
    • Back neckline facing – 2 pieces
    • Front neckline facing – 2 pieces
    • Cuff – 2 pieces
    • Waistband – 1 piece on fold
  • From lace fabric:
    • Sleeve – 2 pieces
  • From fusible interfacing:
    • Back neckline facing – 1 piece
    • Front neckline facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the designated pieces.
  2. Stitch shoulder seams, press allowances towards the back and serge.
  3. Stitch shoulder seams of upper and lower front and back neckline facings, press allowances open. Fold facings right sides together and stitch neckline edge. Clip allowances, turn facings right side out and press. Attach the upper facing to the garment's neckline edge, press allowances towards the facing. Fold under the outer edge of the lower facing and topstitch into the seam of the upper facing attachment.
  4. Attach sleeve to front and back, press allowances towards the main piece and serge.
  5. Stitch side seams simultaneously with sleeve seams, press allowances towards the back and serge.
  6. Stitch cuff into a loop, press allowances open. Fold cuff in half lengthwise, right side out, and press. Place cuff with right side of sleeve and attach to the lower edge, slightly stretching the cuff, press allowances and serge.
  7. Stitch waistband into a loop, press allowances open. Fold waistband in half lengthwise, right side out, and press. Place waistband with right side of garment and attach to the lower edge, slightly stretching the waistband, press allowances and serge.

Order Pattern

Quick size selection

Support

Minerva Support

Online
Support
Welcome to Minerva Patterns support. We can help with our patterns, file formats, and order status. How can we assist you?