Pattern

Fabric & Materials

FABRIC RECOMMENDATIONS: medium stretch knit fabric made from natural or blended fibers.

CUTTER'S MUST

IF THE PATTERNS HAVE A DOUBLE CONTOUR, SEAM ALLOWANCES ARE INCLUDED. IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: hem allowance for the garment bottom and sleeve hem – 1.5 cm, other seams 1 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can range from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED. WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

• From main fabric:
  • Back – 1 piece
  • Front – 1 piece
  • Sleeve – 2 pieces
  • Placket – 1 piece

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity.

Sewing Instructions

1. Attach the sleeve to the front. Serge the seam and press it.
2. Attach the sleeve to the back. Serge the seam and press it.
3. Stitch the sleeve seam and side seam in one continuous seam. Serge the seams and press them.
4. Serge the bottom edge of the garment and the bottom edge of the sleeve. Fold to the wrong side, press, and topstitch.
5. Stitch the placket into a loop. Turn the placket right side out and press it. Fold the placket in half, wrong sides together. Attach the placket to the neckline, slightly stretching the placket and aligning the notches. The placket seam is located at the top of the left sleeve. Serge the placket attachment seam and press it.