Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A knee-length women's dress for knit fabric, with short sleeves cut in one with the bodice and gathered on 1 cm elastic at the hem, a blouson bodice over a front waist seam and a separate self-fabric tie belt. Pull-on, no fastenings. Drafted to your own measurements. Recommended fabric: knit fabric with medium or low stretch, made from natural or blended fibres.
A knee-length women's dress for knit fabric, with short sleeves cut in one with the bodice and gathered on 1 cm elastic at the hem, a blouson bodice over a front waist seam and a separate self-fabric tie belt. Pull-on, no fastenings.
Silhouette: Blouson bodice with fullness above the waist and a straight skirt.
Length: Knee length.
Neckline: Round neckline, overlocked, turned under and topstitched.
Sleeves: Short, wide sleeves cut in one with the front and back, gathered into an elastic casing at the hem.
Front: Upper and lower front joined at the waist seam, allowance pressed downwards.
Back: Back cut in two pieces; the belt ties at the back.
Waist: Self-fabric belt folded in half lengthwise, stitched and turned, worn over the waist seam.
Finishing: Seams sewn with a stretch stitch, a narrow zigzag or on an overlocker; hems topstitched with a twin needle.
Beginner. Four pattern pieces, straight seams, turned and topstitched edges and an elastic casing; the only extra skill is handling knit fabric.
Knit fabric with medium or low stretch, made from natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: hem – 2 cm; neckline and sleeve edges – 1.5 cm; all other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!
From main fabric:
Tip: Knit pieces are stitched with a special stretch stitch or a narrow zigzag. When serging, trim allowances to 0.8 cm. Hems are topstitched with a twin needle to keep them elastic. You can also sew the pieces directly on a 3- or 4-thread overlocker.

#4525
Paneled Three-Quarter Sleeve Shift Dress

#4521
Bow Detail Panel Front Dress
#4528
Belted Collared Shirtdress with Patch Pockets

#4519
Pleated Bodice Fit-and-Flare Dress with Pointed Collar

#4529
Fitted Dress With Contrast Panels

#4517
Sleeved Dress With Pockets And Back Zipper

#4531
Fitted Dress With Sleeves And Bow

#4515
Off-Shoulder Maxi Dress Puff Sleeves

Minerva Support
Online