Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4522
#4524

Blouse with Pleated Back & Tulip Sleeves

Pattern #4523

A women's pull-on blouse in two layers with short tulip sleeves and a round neckline. The outer layer is shorter; the longer inner back is pleated from the neckline and shows below a curved hem of the outer back and below the front. Drafted to your own measurements. Recommended fabric: silk fabrics in natural or blended fibres.

Tech. Description

Blouse with Pleated Back & Tulip Sleeves

A women's pull-on blouse in two layers with short tulip sleeves and a round neckline. The outer layer is shorter; the longer inner back is pleated from the neckline and shows below a curved hem of the outer back and below the front.

When To Wear

  • In summer with slim trousers, jeans or a pencil skirt.
  • Under a jacket at the office.

Key Design Features

Silhouette: Loose, layered; the inner layer adds fullness at the back.

Length: Below the hip, longer at the back.

Neckline: Round; the outer front is faced to the inner front along the neckline, then both are treated as one piece.

Sleeves: Short tulip sleeves, each made of a front and a back part that overlap at the top, gathered at the cap and set into the armhole.

Front: Outer and inner fronts, each cut on the fold.

Back: The outer back is cut away in an arch at the hem. The inner back, cut on the fold, has pleats stitched down 15 cm from the neckline, pressed towards the centre, that open into fullness below.

Closure: None; the blouse is pulled on over the head.

Finishing: Narrow 0.5 cm hems on the body and sleeves, overlocked and topstitched.

Level Of Difficulty

Intermediate. Stitched-down pleats, joining two layers at the neckline and armholes, gathered two-part sleeves and narrow hems in silk.

Fabric Recommendations

Silk fabrics in natural or blended fibres.

Additional Supplies

  • None besides fabric and thread.

Cutter's Must

From main fabric:

  • 1. Inner back – 1 piece on fold
  • 2. Outer back — 1 piece on fold
  • 3. Inner front — 1 piece on fold
  • 4. Outer front — 1 piece on fold
  • 5. Back of sleeve — 2 pieces
  • 6. Front of sleeve — 2 pieces

Sewing Instructions

  1. Form pleats on the inner back, stitch them for 15 cm from the neckline, press (depths directed towards the center).
  2. Stitch the side and shoulder seam allowances of the outer and inner blouse pieces, press seam allowances towards the back and serge.
  3. Place the outer front right side to the wrong side of the inner front and stitch the neckline edge. Clip seam allowances at curves, turn front panels right side out, straighten, press. Secure front panels along armhole edges and then treat as one piece.
  4. Stitch the sleeve edge, press seam allowances and serge. Serge the lower sleeve edge, press to the wrong side and topstitch. Along the upper sleeve edge, stitch with a loosely tensioned thread and gather. Place the back of the sleeve onto the front and secure along the upper edge.
  5. Set the sleeves into the armholes, press seam allowances and serge.
  6. Serge the lower edges of the garment, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?