Blouse with Back Loops and Buttons
Introducing a women's blouse pattern featuring a relaxed silhouette, a flattering V-neck, roll-up sleeves with tab detail, and a unique buttoned back closure with decorative loops.
When To Wear
This versatile blouse is perfect for:
-
Everyday & Casual Wear: Its relaxed fit and stylish details make it ideal for comfortable daily outfits.
-
Work-Appropriate & Smart Casual: Easily dressed up with tailored bottoms for a polished office or business casual look.
-
Relaxed Outings & Weekends: Perfect for brunches, shopping, or comfortable weekend events.
Key Design Features
Silhouette: Relaxed and flowing, offering comfortable wear with a gently curved, tunic-like hem.
Neckline: a flattering V-neckline leads into a partial button-front placket.
Closure: Partial button-front placket with a distinctive back closure featuring decorative loops and buttons along the center seam.
Sleeves: Long sleeves designed with roll-up tabs and button fasteners for versatile styling.
Back: Features a clean back yoke and a central seam detailed with functional fabric loops and button fastenings.
Hem: a gracefully curved hemline, slightly longer at the back for a modern, relaxed finish.
Level Of Difficulty
Intermediate. Requires accurate construction of button plackets, bias loops, and neckline finishing.
Fabric Recommendations
Achieve the ideal drape and comfort with lightweight blouse fabrics:
- Lightweight blouse fabrics from natural or blended fibers (e.g., cotton, viscose, polyester)
Additional Supplies
- Fusible interfacing
- 9 buttons
Cutter's Must
If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: Hem allowance – 1.2 cm; sleeve hem allowance – 2 cm; other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical details).
- From main fabric:
- Back yoke – 1 piece
- Back side - 2 pieces
- Back insert – 1 piece
- Front outer - 1 piece on fold
- Front inner - 1 piece on fold
- Sleeve – 2 pieces
- Front placket – 2 pieces
- Sleeve placket - 2 pieces
- From fusible interfacing:
Sewing Instructions
When stitching pieces, pay attention to the notches - they must match!
- Fuse interfacing to the designated pieces.
- Cut a bias strip 2.5 cm wide and 15 cm long. Fold the strip in half lengthwise, right sides together, and stitch 0.3 cm from the fold. Trim seam allowances close to the stitching, turn the strip right side out and press. Cut into loops. The length of one loop is 4 cm.
- Attach the loops to the right back side according to the markings. Attach the insert to the back side parts, press seam allowances towards the side seam and serge.
- Attach the back yoke to the back, press seam allowances upwards and serge.
- Cut (if not ready-made) a bias binding 4 cm wide and a length equal to the back neckline length + 5 cm. Fold the bias binding in half lengthwise, wrong sides together, and press. Place the binding with the neckline edge, right sides together, and stitch. Clip seam allowances.
- Fold the front placket pieces in half lengthwise, right sides together, and stitch the upper edge. Trim seam allowances at the corner, turn the pieces right side out, smooth, and press.
- Attach the plackets to the right side of the outer front along the long edge, stopping 1 cm from the bottom. Clip the front allowance at the corners, stopping 1 mm from the stitching. Tuck the ends of the plackets inwards and stitch, securing the bottom edge.
- Clip the inner front between the longitudinal lines, stopping 1 cm from the transverse line, and clip at the corners. Place the outer front and inner front right sides together and stitch the neckline edge. Clip seam allowances at curves, turn the pieces right side out, smooth, and press. Fold the allowances of the slit under the placket on the inner front inwards and stitch to the placket allowances.
- Serge the bottom of the inner front, press to the wrong side, and topstitch. Secure the outer and inner fronts at the edges and treat as one piece thereafter.
- Place the front and back pieces right sides together at the shoulder edges, positioning the front between the back and the bias binding. Stitch the shoulder edges, press seam allowances towards the back and serge. Fold the binding to the wrong side and topstitch along the fold to the main piece. Press the seam.
- Fold the tabs in half lengthwise, right sides together, and stitch along the long and short edges. Turn right side out, trimming seam allowances at the corners, smooth and press. Serge the open short edge. Topstitch the tabs to the wrong side of the sleeves according to the markings.
- Set the sleeves into the open armholes, press seam allowances and serge. Stitch the sleeve edges simultaneously with the side edges, press seam allowances towards the back and serge.
- Serge the bottom of the garment, press to the wrong side, and topstitch. Fold the sleeve hem twice by 1 cm, press, and topstitch.
- Make buttonholes on the tabs. Sew buttons to the sleeves. Sew buttons to the left back side. Align the front plackets and secure with buttons, stitching them through all layers.
