Blouse with Pleated Neckline & Tulip Sleeves
Introducing a women's sewing pattern for a charming, loose-fitting blouse, defined by its elegantly gathered front neckline and gently puffed cap sleeves.
When To Wear
This versatile blouse is perfect for a range of occasions, offering effortless comfort and style:
-
Everyday Chic: An ideal choice for daily wear, providing a relaxed yet polished look.
-
Smart Casual Gatherings: Easily dressed up with tailored trousers or down with jeans for social events.
-
Warm Weather Elegance: Its lightweight design and cap sleeves offer comfort and sophistication during warmer months.
Key Design Features
Silhouette: a loose, relaxed fit that drapes gracefully, finishing at hip length.
Neckline: a soft round neckline featuring delicate gathers across the front for a feminine touch.
Closure:s a subtle keyhole opening at the back neck, secured with a refined button-and-loop closure.
Sleeves: Charming cap sleeves with a gathered crown, adding a touch of volume and soft shaping.
Back: a clean and simple back design, highlighting the elegant neckline closure.
Hem: a straight bottom hem, offering a classic finish suitable for tucking in or wearing untucked.
Level Of Difficulty
Intermediate. This pattern involves techniques such as creating gathers, working with bias binding for a neck slit, crafting a button loop, and setting in gathered cap sleeves.
Fabric Recommendations
For a beautiful drape and comfortable wear, choose lightweight fabrics with fluid movement, such as:
- Silk fabrics made from natural or blended fibers
Additional Supplies
Cutter's Must
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance - 1.2 cm; other allowances - 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can range from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!
- From main fabric:
- Back – 1 piece on fold
- Front – 1 piece on fold
- Back sleeve – 2 pieces
- Front sleeve – 2 pieces
Sewing Instructions
- Fold and secure pleats on the front neckline (depths directed towards the center).
- Make a slit on the back along the marked line. Cut a bias binding from the main fabric 4 cm wide and a length equal to twice the slit length + 4 cm. Fold the binding in half lengthwise and press. Press the outer allowances towards the center. Finish the slit with bias binding.
- Stitch the side and shoulder seams of the blouse, press allowances towards the back and overlock.
- Cut a bias strip 3 cm wide and 5 cm long. Fold the strip in half lengthwise and stitch 0.3 cm from the fold. Trim allowances and turn the piece right side out. Adjust the loop length.
- Cut (if not ready-made) a bias binding 4 cm wide and a length equal to the neckline length + 5 cm. Fold the bias binding in half lengthwise right side out and press. Place the binding with the neckline edge right side up and stitch. Clip allowances. Fold the binding to the wrong side and topstitch along the fold to the main piece, inserting the loop. Press the seam.
- Stitch the sleeve seam, press allowance and overlock. Overlock the lower edge of the sleeve, press to the wrong side and topstitch. Along the upper edge of the sleeve, stitch with a loosely tensioned thread and gather. Place the back sleeve over the front and secure along the upper edge.
- Set sleeves into armholes, press allowances and overlock.
- Overlock the lower edges of the garment, press to the wrong side and topstitch.
- Sew on the button.
