Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4521
#4523

Silk Blouse

Pattern #4522

A women's hip-length blouse with long cut-on sleeves, a round neckline and a centre front seam. A faced tab at the neckline is pulled through a faced slot on the right front, which is gathered from the neckline, forming a soft drape. Drafted to your own measurements. Recommended fabric: silk and silky fabrics with good drape, in natural or blended fibres.

Tech. Description

Silk Blouse

A women's hip-length blouse with long cut-on sleeves, a round neckline and a centre front seam. A faced tab at the neckline is pulled through a faced slot on the right front, which is gathered from the neckline, forming a soft drape.

When To Wear

  • To the office with a pencil skirt or tailored trousers.
  • Under a jacket or on its own for dinners and events.

Key Design Features

Silhouette: Loose fit, rounded hem.

Length: Hip length.

Neckline: Round neckline finished with interfaced facings; the front facings continue into a tab that is threaded through the slot.

Sleeves: Long sleeves cut in one with the front and back, with a seam along the top of the arm and the underarm seam sewn together with the side seam.

Front: Right and left fronts joined by a centre front seam. The right front is gathered from the neckline down to a mark and has a slot finished with a rectangular facing.

Back: One piece cut on the fold, with no centre back seam.

Finishing: 1.5 cm hems at the bottom and sleeves, overlocked, turned up and topstitched.

Level Of Difficulty

Intermediate. Gathering, making a faced slot, facing a neckline with an attached tab and handling slippery silk.

Fabric Recommendations

Silk and silky fabrics with good drape, in natural or blended fibres.

Additional Supplies

  • Fusible interfacing (front facings, back neck facing)

Cutter's Must

From main fabric:

  • Back - 1 piece on fold
  • Right front - 1 piece
  • Left front – 1 piece
  • Right front facing – 1 piece
  • Left front facing – 1 piece
  • Back neckline facing – 1 piece

From fusible interfacing:

  • Right front facing – 1 piece
  • Left front facing – 1 piece
  • Back neckline facing – 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to the respective pieces.
  2. On the right front, stitch from the neckline edge to the mark with a loosened top thread and gather.
  3. Cut a rectangular facing for the slit on the right front, with a length equal to the slit length +2 cm. Place the facing onto the slit and stitch along the marked lines. Cut the pieces between the stitches, turn the facing to the wrong side. Press the pieces.
  4. Stitch the center seam of the front. Overlock the seam allowances and press towards the left piece. Stitch the side seams simultaneously with the sleeve edge. Overlock the seam allowances and press towards the back. Stitch the upper sleeve edge. Overlock the seam allowances and press towards the back.
  5. Stitch the facing pieces, press open the seam allowances. Overlock the outer edge.
  6. Place the facings onto the neckline, right sides together, and stitch along the neckline and the long edges of the tail. Straighten the short edge of the tail, positioning the facing edge in the middle, and stitch. Trim the seam allowances at the corners, clip the neckline corner on the left piece, and turn to the right side. Press the neckline and tail. Insert the tail into the finished opening.
  7. Overlock the hem of the garment and sleeves, press to the wrong side, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?