Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4520
#4522

Bow Detail Panel Front Dress

Pattern #4521

A knee-length women's dress with short set-in sleeves, a darted front yoke above a curved high seam, two hemmed overlay panels on the lower front that meet at the centre and part towards the hem, and a small bow at the centre of the yoke seam. Invisible zipper and vent at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres.

Tech. Description

Bow Detail Panel Front Dress

A knee-length women's dress with short set-in sleeves, a darted front yoke above a curved high seam, two hemmed overlay panels on the lower front that meet at the centre and part towards the hem, and a small bow at the centre of the yoke seam. Invisible zipper and vent at the centre back.

When To Wear

  • At the office or for daytime meetings, with court shoes.
  • For summer lunches and family celebrations.

Key Design Features

Silhouette: Slightly flared from the high front seam, shaped with darts.

Length: Knee length.

Neckline: Round neckline finished with an interfaced facing, tacked to the shoulder seams and the zipper tape.

Sleeves: Short, set-in, one seam, hem turned up 1.2 cm and topstitched.

Front: Front yoke with bust darts, joined to the lower front with a curved seam below the bust. The lower front has waist darts and carries two overlay panels, hemmed along the centre and lower edges and basted to it at the top and sides.

Closure: Invisible zipper in the centre back seam.

Back: Centre back seam, shoulder and waist darts, and a vent at the centre back hem.

Finishing: Seams overlocked; dress hem turned up 2 cm and blind-stitched by hand; a purchased decoration (bow) sewn at the centre of the yoke seam.

Level Of Difficulty

Intermediate. A centre back vent, an invisible zipper, a layered front with overlay panels caught into the yoke and side seams, and a facing finished to the zipper.

Fabric Recommendations

Dress fabrics made from natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (neckline facings, vent area)
  • Decorative embellishment (bow)

Cutter's Must

From main fabric:

  • Back – 2 pieces
  • Front Yoke – 1 piece
  • Lower Front – 1 piece
  • Detachable Piece Front – 2 pieces
  • Upper Sleeve – 2 pieces
  • Front Neckline Facing – 1 piece
  • Back Neckline Facing – 2 pieces

From fusible interfacing:

  • Front Neckline Facing – 1 piece
  • Back Neckline Facing – 2 pieces

Sewing Instructions

  1. Fuse interfacing to the Front Neckline Facing and Back Neckline Facing.
  2. Stitch the shoulder and waist darts on the Back and Lower Front pieces and press the dart depths towards the center of the pieces. Stitch the bust darts on the Front Yoke, trim the dart depths to 0.5 cm, press them downwards and overlock.
  3. On the left Back, trim 5 cm off along the vertical edge of the vent extension. Fuse interfacing to the vent area on the wrong side of both Back pieces. On the right side, mark the center seam line (vent fold line). On the left piece, press the vent along the fold line; on the right piece, press only the vent allowance (6 cm) to the wrong side. Align the pieces along the center seam and baste them together at the upper edge of the vent. Overlock the vent allowances. Stitch the center back seam from the mark to the vent corner. Clip into the corner of the vent allowance on the right piece. Press the center seam allowances open and overlock them; press the vent allowances and secure them from the right side with machine stitching. Insert the invisible zipper.
  4. Overlock the center edge of each Detachable Piece Front, press it to the wrong side and topstitch. Overlock the lower edge, press it to the wrong side and topstitch. Lay the overlay panels on the Lower Front and baste along the upper and side edges. Handle them as one piece from now on.
  5. Stitch the Front Yoke to the lower front, press allowances towards the yoke and overlock.
  6. Stitch the side and shoulder seams, press allowances towards the back and overlock.
  7. Stitch the shoulder seams of the facings, press the allowances open. Overlock the outer edge. Place the dress with the facing right sides together, aligning the neckline edges. Stitch the neckline edge and the front opening. Clip allowances on curves, trim corners, on the front opening section, trim allowance to 0.1 - 0.2 cm. Turn pieces to the right side, straighten and press. Attach the facing to the shoulder seams and the zipper tape.
  8. Stitch the sleeve seam, press the allowances and overlock. Set in the sleeves into the armholes, matching notches. Press allowances and overlock.
  9. Overlock the sleeve hem allowance, press to the wrong side and topstitch. Overlock the dress hem allowance, press to the wrong side and hem with blind stitches.
  10. Sew the decorative embellishment (bow) to the center of the empire seam.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?