Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4513
#4515

Skirt with Front Panel Seams

Pattern #4514

A knee-length women's straight skirt with an asymmetric front: diagonal panel seams running from the waist towards the side, a contrast insert and a free-hanging double-layer flap that forms a curved wrap-look edge down to the hem. Straight waistband, centre back zipper. Drafted to your own measurements. Recommended fabric: lightweight suiting in natural or blended fibres for the skirt; a contrast fabric for the front insert.

Tech. Description

Skirt with Front Panel Seams

A knee-length women's straight skirt with an asymmetric front: diagonal panel seams running from the waist towards the side, a contrast insert and a free-hanging double-layer flap that forms a curved wrap-look edge down to the hem. Straight waistband, centre back zipper.

When To Wear

  • To the office with a blouse or a fitted jacket.
  • In spring and autumn with knitwear, tights and low heels.
  • With a plain top in the contrast colour of the insert.

Key Design Features

Silhouette: Straight, close-fitting skirt.

Length: To the knee.

Waist: Straight waistband, interfaced, fastened with one button and a buttonhole at the centre back.

Front: Built from four sections: left, middle and right panels plus a contrast insert set between the middle and right panels. Diagonal seams fan out from the waist towards the side seam.

Skirt: A loose flap, folded in half lengthwise and stitched across the lower end, is caught into the seam between the left and middle panels. It is shorter than the skirt by the hem allowance and gives the front its overlapping wrap effect.

Back: Two back pieces with two darts each and a centre back seam.

Closure: Zipper in the centre back seam.

Finishing: Seams overlocked; 2 cm hem turned up and sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Joining angled panels and a contrast insert, setting a flap into a seam, inserting a zipper and attaching a waistband.

Fabric Recommendations

Lightweight suiting in natural or blended fibres for the skirt; a contrast fabric for the front insert.

Additional Supplies

  • Contrast fabric for the insert
  • Fusible interfacing (waistband)
  • Zipper
  • 1 button

Cutter's Must

From main fabric:

  • Back skirt half – 2 pieces
  • Right front skirt half – 1 piece
  • Middle front skirt half – 1 piece
  • Left front skirt half – 1 piece
  • Detachable of front skirt half – 1 piece
  • Waistband – 1 piece

From contrast fabric:

  • Front skirt half insert – 1 piece

From fusible interfacing:

  • Waistband – 1 piece

Sewing Instructions

  1. Fuse the waistband with fusible interfacing.
  2. Stitch darts on back skirt halves. Press the fullness towards the center.
  3. Overlock the seam allowances of the center back seam on each piece separately. Stitch the center seam from the zipper mark to the bottom, press the seam allowances open, pressing the slit for the zipper. Insert the zipper.
  4. Fold the detachable in half lengthwise, right sides together, and stitch along the bottom edge. Turn the piece right side out, straighten, and press.
  5. Fold the left and middle parts of the front skirt half, insert the detachable between them (the length of the detachable is less by the width of the hem allowance) and stitch. Press the seam allowances towards the middle and overlock.
  6. Attach the front skirt half insert to the middle front skirt half, press the seam allowances towards the insert and overlock. Attach the right front skirt half to the insert, press the seam allowances towards the insert, overlock.
  7. Stitch the side seams. Press the seam allowances towards the back and overlock.
  8. Attach the waistband to the upper edge of the skirt. Stitch the ends of the waistband, trim the seam allowances at the corners and turn out. Fold under the inner edge of the waistband and topstitch into the attaching seam. Press the waistband when finished.
  9. Overlock the bottom edge of the skirt, press to the wrong side and hem with blind stitches.
  10. Mark and make a buttonhole on the waistband. Sew on the button.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?