Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4512
#4514

Lace Yoke Dress with Overlay Skirt and Sweetheart Bodice

Pattern #4513

A fitted knee-length women's dress with a lace yoke and lace elbow-length sleeves, a sweetheart-shaped yoke seam, princess-seamed bodice, a separate waistband and a narrow skirt with a two-layer wrap overlay at the front and a centre back vent. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres for the main body; lace fabric or guipure for the yokes and sleeves.

Tech. Description

Lace Yoke Dress with Overlay Skirt and Sweetheart Bodice

A fitted knee-length women's dress with a lace yoke and lace elbow-length sleeves, a sweetheart-shaped yoke seam, princess-seamed bodice, a separate waistband and a narrow skirt with a two-layer wrap overlay at the front and a centre back vent.

When To Wear

  • Weddings, receptions and evening celebrations.
  • Theatre or dinner out, with heels and a clutch.

Key Design Features

Silhouette: Close-fitting throughout, shaped by princess seams on the front and back bodice and darts on the lower front and back.

Length: About knee length.

Neckline: Round neckline in the lace yoke, bound with a 4 cm wide lace bias strip folded in half and topstitched along the fold.

Sleeves: Elbow-length set-in sleeves cut from lace.

Front: Lace front yoke joined to the bodice along a sweetheart-shaped seam; centre front and side front bodice pieces.

Waist: Separate front and back waistband between bodice and skirt.

Skirt: Narrow skirt; at the front, two faced overlay pieces (right and left), each cut double, lie one over the other in curved wrap lines and are basted to the skirt at the side and upper edges.

Back: Lace back yoke, princess seams, centre back seam with a concealed zipper from the neckline and a lapped vent at the hem.

Level Of Difficulty

Intermediate. Princess seams, handling lace, a lapped back vent, a concealed zipper, a bias-bound neckline and a faced two-layer skirt overlay.

Fabric Recommendations

Dress fabrics made from natural or blended fibres for the main body; lace fabric or guipure for the yokes and sleeves.

Additional Supplies

  • Concealed zipper
  • Fusible interfacing (back vent)

Cutter's Must

From main fabric:

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Back Waistband – 2 pieces
  • Lower Back – 2 pieces
  • Lower Front – 1 piece
  • Front Waistband – 1 piece
  • Side Front – 2 pieces
  • Center Front – 1 piece
  • Right Detachable Piece – 2 pieces
  • Left Detachable Piece – 2 pieces

From lace fabric:

  • Back Yoke – 2 pieces
  • Front Yoke – 1 piece
  • Sleeve – 2 pieces

Sewing Instructions

  1. Stitch the darts on the Lower Back and Lower Front, press the dart allowances towards the center of the pieces.
  2. Stitch the princess seams of the back (Center Back to Side Back) and front (Center Front to Side Front), press the seam allowances towards the center and overlock.
  3. Stitch the Back Yoke to the back, press the seam allowances towards the yoke and overlock. Stitch the Back Waistband to the upper back, press the seam allowances towards the waistband and overlock. Stitch the Lower Back to the Back Waistband, press the seam allowances towards the waistband and overlock.
  4. On the left Lower Back, trim 5 cm off along the vertical edge of the vent. On both Lower Back pieces, interface the vent area from the wrong side. On the right side, mark the center back seam line (vent fold line). Press the left vent extension along the fold line; on the right piece, press only the 6 cm vent allowance to the wrong side. Align the pieces along the center back seam and baste along the upper edge of the vent. Overlock the center back edges separately on each piece. Overlock the vent allowances. Stitch the center back seam from the zipper notch to the corner of the vent. Clip the seam allowance at the vent corner on the right piece. Press the center back seam allowances open, press the vent allowances and secure them with a line of machine stitching. Insert the concealed zipper from the upper edge to the notch.
  5. Stitch the Front Yoke to the front, press the seam allowances towards the yoke and overlock. Stitch the Front Waistband to the upper front, press the seam allowances towards the waistband and overlock.
  6. Place the two Left Detachable Piece layers right sides together and stitch along the lower edge. Clip the seam allowances, turn right side out, ease out the edge and press. Fold along the marked line and baste along the raw edges.
  7. Place the two Right Detachable Piece layers right sides together, insert the Left Detachable Piece between them, and stitch along the outer edge. Clip the seam allowances, turn right side out, ease out the edge and press.
  8. Place the overlay on the Lower Front and baste along the side and upper edges. Stitch the Lower Front to the Front Waistband, press the seam allowances towards the waistband and overlock.
  9. Stitch the shoulder and side seams, press the seam allowances towards the back and overlock.
  10. Cut a bias strip from the lace fabric, 4 cm wide and as long as the neckline + 2 cm. Fold the bias strip in half lengthwise, wrong sides together, and press. Place the binding on the neckline edge from the right side, letting the ends extend, and stitch. Turn the binding to the wrong side, clip the seam allowances and topstitch along the fold onto the garment, tucking under the excess binding at the center back seam. Press the neckline.
  11. Stitch the Sleeve seams, press the seam allowances and overlock. Set the sleeves into the armholes, press the seam allowances and overlock.
  12. Overlock the lower edge of the dress and the sleeve hems, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?