Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A knee-length women's straight skirt with an asymmetric front: a curved seam runs from the left side seam at the hip down to the hem, edged on each side by a trim strip in a second fabric, and opens into a slit at the bottom. Faced waist, no waistband. Drafted to your own measurements. Recommended fabric: suiting fabrics in natural or blended fibres, in two related colours.
A knee-length women's straight skirt with an asymmetric front: a curved seam runs from the left side seam at the hip down to the hem, edged on each side by a trim strip in a second fabric, and opens into a slit at the bottom. Faced waist, no waistband.
Silhouette: Straight and close-fitting, shaped by back darts.
Length: Knee length.
Front: Left and right fronts cut from two related colours, joined by a curved seam. Each front has its own trim strip along the seam, faced on the inside with an interfaced strip; below the slit mark the strips form the two edges of the slit.
Closure: Invisible zipper in the centre back seam.
Back: Centre back seam and darts.
Waist: Finished at the natural waist with an interfaced facing, understitched 0.2 cm from the seam and sewn to the zipper tape.
Finishing: Hem turned up and sewn by hand with blind stitches.
Intermediate. Setting trim strips into a long curved seam, a faced slit at the end of that seam, an invisible zipper and a faced waist.
Suiting fabrics in natural or blended fibres, in two related colours.
From main fabric 1:
From main fabric 2:
From fusible interfacing:

#4514
Skirt with Front Panel Seams

#4518
Fitted Skirt with Pleated Front Overlay

#4520
Yoked Skirt with Flaps and Back Vent

#4503
Waisted Flounce Skirt with Back Vent

#4561
Draped Front Pencil Skirt

#4564
Asymmetrical Layered Skirt with Back Zip

#4576
Pencil Skirt with Angled Contrast Inserts

#4579
Flared High-Low Hem Skirt with Waist Tie

Minerva Support
Online