Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted top in knit fabric with short cap sleeves, curved princess seams piped with decorative trim, and an asymmetric front: a left yoke meets the front along a diagonal line closed with an exposed zipper edged in trim. Drafted to your own measurements. Recommended fabric: knit fabrics with medium stretch, of natural or blended fibres.
A women's fitted top in knit fabric with short cap sleeves, curved princess seams piped with decorative trim, and an asymmetric front: a left yoke meets the front along a diagonal line closed with an exposed zipper edged in trim.
Silhouette: Fitted, shaped by curved princess seams front and back; straight hem at hip level.
Neckline: Round neckline bound with knit binding.
Sleeves: Short cap sleeves set into the armhole; lower edge bound with bias binding.
Front: A one-piece centre front with a diagonal upper edge, a separate left front yoke, and side fronts. The zipper sits between the yoke and the front, topstitched 0.5 mm from the teeth, with a strip of decorative trim along the tape.
Back: Centre back seam, back darts, and princess seams with trim inserted.
Finishing: Armhole seams finished with knit binding; hem turned twice by 1 cm and topstitched.
Intermediate. Piping inserted into curved seams, an exposed zipper on a diagonal edge, and binding on knit fabric.
Knit fabrics with medium stretch, of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: hem allowance of the garment – 1.5 cm, allowance at the sleeve hem and neckline – 0 cm; other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). Attention! The labels on the patterns are written on the right side. When stitching pieces, pay attention to the notches – they must match!

Minerva Support
Online