Blouse with a Flounced Collar
A women's fitted blouse with a round neckline, a flounce collar that runs around the neck and down the front edges, short two-tier flutter sleeves and a six-button front placket. Princess seams front and back.
When To Wear
- In spring and summer with pencil skirts or trousers.
- At the office, worn alone or under a cardigan.
Key Design Features
Silhouette: Fitted through princess seams on the front and back; straight hem at hip level.
Collar: Flounce collar cut in two halves joined at the centre back. Its outer edge is bound with bias binding; the lower ends are caught into the front edges and fall in folds down to the third button.
Sleeves: Short set-in sleeves of two layers, an upper and a lower flounce, both edges bound with bias binding and joined at the cap.
Front: Princess seams from the armholes and a sewn-on button placket with six buttons.
Back: Centre back seam, princess seams and back darts.
Finishing: Neckline seam covered with bias binding; seams overlocked; hem turned twice by 1 cm and topstitched.
Level Of Difficulty
Intermediate. Princess seams, bias-bound flounce edges, a two-layer sleeve set into the armhole, and sewn-on plackets.
Fabric Recommendations
Blouse fabrics of natural or blended fibres.
Additional Supplies
- Fusible interfacing (plackets)
- 6 buttons
- Bias binding (approximate length marked on the front pattern piece)
Cutter's Must
From main fabric:
- 1. Back — 2 pieces
- 2. Back side - 2 pieces
- 3. Front center — 2 pieces
- 4. Front side — 2 pieces
- 5. Collar – 2 pieces
- 6. Upper sleeve — 2 pieces
- 7. Lower sleeve — 2 pieces
- 8. Placket — 2 pieces
From fusible interfacing:
Sewing Instructions
- Fuse the placket pieces with fusible interfacing.
- Place collar pieces right sides together and stitch the center seam. Finish the seam allowance with bias binding and press to the left side. Finish the outer contour with bias binding.
- Stitch the darts on the back. Press the dart depths towards the center back.
- Stitch the princess seams on the front and back. Overlock the seam allowances and press towards the center. Stitch the center seam of the back. Overlock the seam allowance and press to the left side.
- Stitch the side and shoulder seams. Overlock the seam allowances and press towards the back.
- Finish the lower sleeve edges with bias binding. Stitch the lower sleeve seam. Overlock the seam allowance and press towards the back. Place the upper sleeve onto the lower sleeve and align along the upper edge. Then treat as one piece.
- Set the sleeve into the armhole. Overlock the seam allowances.
- Place the collar onto the blouse neckline and stitch. Clip the seam allowance and press towards the blouse. Place bias binding over the seam allowance and topstitch, enclosing the seam allowance. Align the lower of the collar with the front edge and secure along the edge.
- Fold the placket and front right sides together and stitch. Turn the placket to the wrong side, stitch the corners, fold the seam allowance of the inner placket inwards and topstitch into the attaching seam.
- Double-fold the hem of the garment to the wrong side by 1 cm and topstitch.
- Make buttonholes and sew on buttons.