Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4450
#4452

Fitted Dress With Princess Seams And Pleats

Pattern #4451

A fitted knee-length women's dress with a crossover V-neck bodice, princess seams on the front, a waist inset band and a narrow skirt with unpressed pleats at the front and back waist. Short cap sleeves and a concealed zip in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, of natural or blended fibres.

Tech. Description

Fitted Dress With Princess Seams And Pleats

A fitted knee-length women's dress with a crossover V-neck bodice, princess seams on the front, a waist inset band and a narrow skirt with unpressed pleats at the front and back waist. Short cap sleeves and a concealed zip in the left side seam.

When To Wear

  • For the office and business meetings, with court shoes and a jacket over it.
  • For daytime events and dinners in the warmer months.

Key Design Features

Silhouette: Fitted bodice, waist inset band, skirt narrowing towards the hem.

Length: To the knee.

Neckline: Deep V-neck formed by two crossing centre front pieces, each cut double and faced to itself along the neckline. The back neckline is round, finished with a 4 cm bias strip folded in half and turned to the inside.

Front: Curved princess seams run from the armhole to the inset band.

Sleeves: Short set-in cap sleeves with a turned and topstitched hem.

Back: Upper back with darts and a centre back seam; the inset band is joined at the centre back.

Waist: Separate inset band at the waist on front and back.

Skirt: Front and back cut on the fold, with pleats laid and stitched at the waist.

Closure: Concealed zip in the left side seam, below the bodice.

Finishing: Seams overlocked; lower armhole allowance turned in and topstitched; dress hem 2 cm, sleeve hem 1.5 cm.

Level Of Difficulty

Intermediate. Self-faced crossover bodice pieces, princess seams, a waist inset band, pleats, bias-bound neckline and a concealed zip.

Fabric Recommendations

Dress fabrics with good drape, of natural or blended fibres.

Additional Supplies

  • Concealed zip
  • Bias binding, 4 cm wide (or cut from the dress fabric)

Cutter's Must

From main fabric:

  • 1. Upper back - 2 pieces
  • 2. Front insert — 2 pieces
  • 3. Lower back - 1 piece on fold
  • 4. Central upper front – 4 pieces
  • 5. Upper side of front — 2 pieces
  • 6. Lower front — 1 piece on fold
  • 7. Front insert – 1 piece
  • 8. Sleeve - 2 pieces

Sewing Instructions

  1. Lay and secure pleats on the lower front and back.
  2. Stitch darts on the back pieces. Press seam allowances towards the center. Stitch the center seam of the back. Overlock and press the seam allowance to the left side. Stitch the center edge of the inserts. Overlock and press the seam allowance to the left side. Attach the center to the upper. Overlock and press the seam allowance onto the insert. Attach the lower. Overlock and press the seam allowance onto the insert.
  3. Cut (if not pre-made) bias binding 4 cm wide and a length equal to the back neckline length + 5 cm. Fold the bias binding in half lengthwise, right sides out, and press. Place the trim strip with the neckline edge right sides together and stitch. Clip the seam allowances. Fold the trim strip to the wrong side and topstitch along the fold onto the main piece. Press the seam.
  4. Fold the central front pieces in pairs and stitch the neckline. Turn the inner out and press.
  5. Stitch the shoulder edge, inserting the back 's seam allowance between the front pieces. Overlock and press the seam allowance towards the back. Stitch the princess seam of the front (central pieces are processed together). Attach the front insert. Overlock and press the seam allowance onto the insert. Attach the lower front. Overlock and press the seam allowance upwards.
  6. Stitch the right side edge, press the seam allowances towards the back and overlock. Overlock the left side seam allowances separately. Stitch the left side edge from the seam joining the upper front parts to the bottom. Press the seam allowance open. Insert the zipper.
  7. Overlock the lower sleeve edge. Fold the seam allowance inwards and topstitch. Set the sleeves into the armholes. Overlock the seam allowances. Overlock the lower of the armhole. Fold the seam allowance inwards and topstitch.
  8. Overlock the lower edge of the dress, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?