Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4451
#4453

Collared Blouse with Bow

Pattern #4452

A semi-fitted women's blouse with short set-in sleeves, a flat rounded collar and a separate bow stitched on at the neckline. Shaped with bust, waist and shoulder darts; no seams down the centre front or back. Drafted to your own measurements. Recommended fabric: blouse fabrics of natural or blended fibres.

Tech. Description

Collared Blouse with Bow

A semi-fitted women's blouse with short set-in sleeves, a flat rounded collar and a separate bow stitched on at the neckline. Shaped with bust, waist and shoulder darts; no seams down the centre front or back.

When To Wear

  • For the office with a pencil skirt or trousers, tucked in or worn loose.
  • In spring and summer under a cardigan or jacket.

Key Design Features

Silhouette: Semi-fitted, shaped by bust darts and waist darts on the front and shoulder and waist darts on the back.

Length: To the hip, with a straight hem.

Collar: Flat collar with rounded ends, cut double and interfaced, set into the round neckline.

Front: Cut in one piece on the fold. A bow from a single folded strip, with one hanging end, is stitched to the front at the collar edge.

Closure: None; pulled on over the head.

Sleeves: Short set-in sleeves with an underarm seam and a turned and topstitched hem.

Back: Cut in one piece on the fold, with no centre back seam.

Finishing: Seams overlocked; the hem is turned twice by 1 cm and topstitched.

Level Of Difficulty

Beginner. Darts, a flat collar set into the neckline, set-in sleeves and a sewn and turned bow; no closure.

Fabric Recommendations

Blouse fabrics of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (collar)

Cutter's Must

From main fabric:

  • Back - 1 piece on fold
  • Front - 1 piece on fold
  • Sleeve – 2 pieces
  • Collar – 2 pieces
  • Bow — 1 piece

From fusible interfacing:

  • Collar – 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to the collar piece.
  2. Place collar pieces right sides together and stitch along the outer contour. Start and end stitching strictly at the marked seam line for attaching. Clip seam allowances at curves. Turn the finished collar right side out and press.
  3. Stitch the waist, shoulder, and bust darts on the back and front. Press the depths of the shoulder and waist darts towards the center back, and the depths of the bust darts upwards.
  4. Stitch the side and shoulder seams, press seam allowances towards the back and serge.
  5. Attach the upper collar to the neckline, turn under the raw edge of the lower collar and topstitch into the attachment seam.
  6. Serge the lower edge of the sleeve, fold inwards and topstitch. Stitch the sleeve seam, press, serge. Set the sleeves into the armholes. Press and serge seam allowances.
  7. Fold the bottom edge of the garment twice to the wrong side by 1 cm and topstitch.
  8. Fold the bow piece in half lengthwise, right sides together, and stitch along three sides, leaving an opening for turning. Trim seam allowances and turn right side out. Close the opening with slip stitches. Form the bow and topstitch onto the blouse according to the technical drawing sketch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?