Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4452
#4454

Fit and Flare V-Neck Cap Sleeve Dress

Pattern #4453

A women's knee-length fit-and-flare dress with a fitted bodice on princess seams, a deep V-neck with a stitched-in insert, short cap sleeves and a flared skirt joined at the waist. Concealed zip at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, of natural or blended fibres.

Tech. Description

Fit and Flare V-Neck Cap Sleeve Dress

A women's knee-length fit-and-flare dress with a fitted bodice on princess seams, a deep V-neck with a stitched-in insert, short cap sleeves and a flared skirt joined at the waist. Concealed zip at the centre back.

When To Wear

  • For summer daytime events, garden parties and family celebrations.
  • For the office with a short jacket or cardigan over it.

Key Design Features

Silhouette: Fitted through the bodice, flaring from the waist seam.

Length: To the knee.

Neckline: Deep V-neck at the front, faced by the double-cut centre front pieces. A folded insert is placed under the V and topstitched 0.5 cm from the neckline edge. The round back neckline is finished with a 4 cm bias strip folded in half and turned to the inside.

Front: Princess seams from the armhole to the waist seam.

Sleeves: Short set-in cap sleeves with a turned and topstitched hem; the lower armhole is finished with bias binding.

Back: Bodice with princess seams and darts; centre back seam running the full length of the dress.

Skirt: Flared; front cut in one piece on the fold, back in two pieces.

Closure: Concealed zip in the centre back seam.

Finishing: Seams overlocked; dress hem 2 cm, sleeve hem 1.5 cm, turned and topstitched.

Level Of Difficulty

Intermediate. Princess seams, a faced V-neck with a separate insert, bias-bound neckline and armholes, and a concealed zip.

Fabric Recommendations

Dress fabrics with good drape, of natural or blended fibres.

Additional Supplies

  • Concealed zip
  • Bias binding, 4 cm wide (or cut from the dress fabric)

Cutter's Must

From main fabric:

  • 1. Upper center back - 2 pieces
  • 2. Upper side of back — 2 pieces
  • 3. Lower back - 2 pieces
  • 4. Center upper front – 2 pieces
  • 5. Upper side of front — 2 pieces
  • 6. Front insert — 1 piece
  • 7. Lower front — 1 piece on fold
  • 8. Sleeve - 2 pieces

Sewing Instructions

  1. Stitch darts on back pieces. Press seam allowances towards the center. Attach side panels, serge seam allowances and press towards the center back. Attach the lower. Serge seam allowance and press upwards. Serge the center edges of the back separately. Stitch the center edge from the zipper mark downwards. Insert the zipper.
  2. Cut (if not pre-made) bias binding 4 cm wide and a length equal to the length of the back neckline + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the trim strip with the neckline edge on the right side and stitch. Clip the seam allowances. Fold the trim strip to the wrong side and topstitch along the fold onto the main piece. Press the seam.
  3. Fold the front insert along the line in half, right side in, and serge the lower edges. Fold the front pieces right sides together and stitch the neckline. Clip the seam allowances, turn the inner out, and press. Place the insert under the neckline and topstitch 0.5 cm from the edge.
  4. Stitch the shoulder seam, inserting the back seam allowance between the front pieces. Serge the seam allowance and press towards the back. Stitch the panel seam of the front (the center pieces are processed together). Attach the lower front. Serge the seam allowance and press upwards.
  5. Stitch the side seams. Serge the seam allowances and press towards the back.
  6. Serge the lower edge of the sleeve. Fold the seam allowance inwards and topstitch. Set the sleeves into the armholes. Cut (if not pre-made) bias binding 4 cm wide and a length equal to the length of the lower armhole + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the trim strip with the armhole edge on the right side and stitch. Clip the seam allowances. Fold the trim strip to the wrong side and topstitch along the fold onto the main piece. Press the seam.
  7. Serge the lower edge of the dress, press to the wrong side, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?