Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4453
#4455

Fitted Dress with Contrasting Yoke and Bands

Pattern #4454

A women's knee-length dress with a fitted bodice on princess seams, an A-line skirt joined at the waist, short overlapping petal sleeves and a contrast front yoke with a small keyhole at the neckline. Contrast hem bands and a long contrast tie belt. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres; a contrast fabric for the yoke, hem bands and belt.

Tech. Description

Fitted Dress with Contrasting Yoke and Bands

A women's knee-length dress with a fitted bodice on princess seams, an A-line skirt joined at the waist, short overlapping petal sleeves and a contrast front yoke with a small keyhole at the neckline. Contrast hem bands and a long contrast tie belt.

When To Wear

  • In spring and summer for daytime events and outings.
  • For the office, belted, with a short cardigan.

Key Design Features

Silhouette: Fitted bodice, A-line skirt from the waist seam.

Length: To the knee.

Neckline: Round neckline with a teardrop keyhole at the centre front, formed by a double, interfaced front yoke in contrast fabric. The back neckline is finished with an interfaced facing.

Front: Contrast yoke across the upper front; princess seams from the yoke to the waist seam.

Sleeves: Short sleeves in two parts, front and back, overlapping at the top of the arm; lower edges bound, without a hem allowance.

Back: Bodice with princess seams, waist seam, and a centre back seam.

Closure: Concealed zip in the centre back seam.

Skirt: A-line, finished at the hem with a contrast band on the front and the back.

Waist: Tie belt from contrast fabric, 22 cm wide before folding, twice the waist measurement plus 1 m long, tied in a bow at the front.

Finishing: Seams overlocked; dress hem 1.5 cm, turned and topstitched.

Level Of Difficulty

Intermediate. Princess seams, a lined yoke with a keyhole, overlapping two-part sleeves with bound edges, a concealed zip and a back neck facing.

Fabric Recommendations

Dress fabrics of natural or blended fibres; a contrast fabric for the yoke, hem bands and belt.

Additional Supplies

  • Contrast fabric
  • Fusible interfacing (front yoke, back neck facing)
  • Concealed zip

Cutter's Must

From main fabric:

  • Upper center back - 2 pieces
  • Upper side back – 2 pieces
  • Lower back – 2 pieces
  • Upper center front - 1 piece
  • Upper side front – 2 pieces
  • Lower front - 1 piece on fold
  • Back sleeve — 2 pieces
  • Front sleeve — 2 pieces
  • Back neckline facing - 2 pieces

From contrasting fabric:

  • Front yoke – 2 pieces
  • Back trim – 1 piece on fold
  • Front trim – 1 piece on fold

From fusible interfacing:

  • Front yoke — 1 piece
  • Back neckline facing - 2 pieces.

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match! Markings on patterns are on the right side!

  1. Interface pieces with fusible interfacing.
  2. Stitch the princess seams of the upper back parts. Overlock allowances and press towards the center. Stitch the upper and lower back parts. Overlock allowance and press downwards. Overlock the center back seams separately. Stitch the center back seam from the zipper mark to the bottom edge, press allowances open. Insert the concealed zipper. Stitch the back trim to the back, press allowances upwards and overlock.
  3. Fold the front yoke pieces right sides together and stitch the neckline and keyhole opening. Clip allowances at curves, trim at corners. Turn pieces right side out, smooth, press, secure along edges, and then treat as one piece.
  4. Stitch the princess seams of the front. Overlock allowances and press towards the center. Stitch the yoke to the front, press allowances downwards and overlock. Stitch the upper and lower front parts, press allowances upwards and overlock. Stitch the front trim to the front, press allowances upwards and overlock.
  5. Overlock the outer edges of the neckline facings. Place the back neckline facing with the back, insert the front between them, align edges and stitch the shoulder seam. Press allowances, overlock. Turn the facing to the wrong side, secure the center edges with the zipper tape.
  6. Stitch the side seams, press allowances towards the back, overlock.
  7. Stitch the sleeve seam, press allowances and overlock. Bind the lower edge of the sleeve in one step. Place the front sleeve on the back, aligning marks, and secure along the upper edge. Set sleeves into armholes, press allowances and overlock.
  8. Overlock the bottom edge of the dress, press to the wrong side and topstitch.
  9. Cut a belt from contrasting fabric, 22 cm wide and a length equal to double the waist circumference + 1 m. Fold the belt in half lengthwise right sides together and stitch along the contour, leaving an opening for turning. Trim allowances at corners, turn the belt right side out. Close the opening.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?