Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4431
#4433

A-Line Dress with V-Notch Neck and Contrast Trim

Pattern #4432

A knee-length women's dress with a round neckline notched at the centre front, short sleeves with turned-up cuffs, a wide waist panel and a softly pleated skirt. The neckband, cuffs, waist panel and hem band are cut from a contrast fabric. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres; a fabric in a contrasting colour for the trim.

Tech. Description

A-Line Dress with Contrast Trim

A knee-length women's dress with a round neckline notched at the centre front, short sleeves with turned-up cuffs, a wide waist panel and a softly pleated skirt. The neckband, cuffs, waist panel and hem band are cut from a contrast fabric.

When To Wear

  • In spring and summer for work or daytime, with flat shoes or low heels.
  • For family occasions and outings, made in two coordinating colours.

Key Design Features

Silhouette: Fitted bodice with darts, a wide waist panel and a slightly flared skirt.

Length: Knee length, with a contrast band joined to the hem of the front and back.

Neckline: Round, with a small V-notch at the centre front; finished with a separate interfaced band in contrast fabric, sewn to the dress and topstitched.

Sleeves: Short set-in sleeves with an eased cap and a folded contrast cuff whose corners meet at a mark, leaving a small split.

Waist: Contrast insert at the waist on the front and back.

Skirt: Front and back cut on the fold, with soft pleats laid into the waist insert seam.

Back: Darts and a centre back seam on the upper back only.

Closure: Invisible zipper in the left side seam.

Finishing: Seams overlocked; hem overlocked, turned up and topstitched.

Level Of Difficulty

Intermediate. Joining contrast inserts and bands, a notched neckband, pleats into a waist seam, set-in sleeves with cuffs and an invisible side zipper.

Fabric Recommendations

Dress fabrics of natural or blended fibres; a fabric in a contrasting colour for the trim.

Additional Supplies

  • Contrast fabric
  • Fusible interfacing (neckband, cuffs)
  • Invisible zipper

Cutter's Must

From main fabric:

  • Upper back - 2 pieces
  • Lower back - 1 piece on fold
  • Upper front – 1 piece
  • Lower front - 1 piece on fold
  • Sleeve – 2 pieces

From contrasting fabric:

  • Back Insert - 2 pieces
  • Front Insert - 1 piece
  • Neckline facing – 4 pieces
  • Cuff - 2 pieces
  • Back Trim - 1 piece
  • Front Trim - 1 piece

From fusible interfacing:

  • Neckline facing – 2 pieces
  • Cuff – 2 pieces

Sewing Instructions

  1. Fuse fusible interfacing to the neckline facing and cuff pieces.
  2. Stitch darts on the upper back pieces. Press darts towards the center seam. Stitch the center seam of the upper back, press seam allowances to the left side and serge. Attach the back insert to the upper back, press seam allowances towards the insert and serge.
  3. On the lower back, create and secure arbitrary pleats. Attach the lower back to the insert, press seam allowances upwards and serge. Attach the back trim to the main piece, press seam allowances upwards and serge.
  4. Stitch darts on the upper front, press depths towards the center. Attach the front insert to the upper front, press seam allowances towards the insert and serge. On the lower front, create and secure arbitrary pleats. Attach the lower front to the insert, press seam allowances upwards and serge. Attach the front trim to the main piece, press seam allowances upwards and serge.
  5. Stitch shoulder seams, press seam allowances towards the back and serge.
  6. Stitch the right side seam. Press seam allowances towards the back and serge. Serge the left side edges separately on each piece. Stitch the left side seam from the armhole to the mark and from the mark to the hem. Press seam allowances open, pressing the slit. Insert the zipper.
  7. Fold neckline facing pieces in pairs, right sides together, and stitch along the outer contour. Trim seam allowances at corners, clip at curves. Turn the facing right side out, straighten, and press. Place the dress with the facing right sides together and stitch. Serge seam allowances and topstitch to the main piece.
  8. Fold the cuff lengthwise in half, right side in, and stitch the side edges. Turn right side out, press. Stitch the sleeve edge, press seam allowances and serge. Set the sleeves into the armholes, matching notches and easing the cap. Press seam allowances and serge. Attach the cuff to the sleeve, positioning the cuff corners at the mark. Serge seam allowances and topstitch to the sleeve.
  9. Serge the hem allowance of the dress, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?