Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4396
#4399

Lace Back Fitted Cap Sleeve Dress

Pattern #4397

A fitted knee-length women's dress in medium-stretch knit with curved knit-lace side panels on the front, a lace upper back cut on the fold, shoulder yokes at front and back, and short cap sleeves. Pulls on over the head, with no zipper. Drafted to your own measurements. Recommended fabric: medium-stretch knit fabrics from natural or blended fibres; knit lace for the side front panels and upper back.

Tech. Description

Lace Back Fitted Cap Sleeve Dress

A fitted knee-length women's dress in medium-stretch knit with curved knit-lace side panels on the front, a lace upper back cut on the fold, shoulder yokes at front and back, and short cap sleeves. Pulls on over the head, with no zipper.

When To Wear

  • Evening dinners, cocktail parties and receptions.
  • Office events in warm weather, or with a jacket in cooler months.

Key Design Features

Silhouette: Close-fitting through bust, waist and hips.

Length: Knee length.

Neckline: Round neckline finished with a 4 cm bias strip folded in half and topstitched to the inside.

Sleeves: Short set-in cap sleeves with a turned and topstitched hem; armholes finished with bias binding.

Front: Centre front cut on the fold and shaped with darts, joined by curved seams to knit-lace side front panels that run from the shoulder to the hip; front yokes at the shoulders.

Back: Lace upper back cut in one piece on the fold, joined to back yokes at the shoulders and to a lower back with a centre back seam and princess seams.

Finishing: Seams overlocked; hem turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. Curved seams joining knit lace to knit fabric, stretch stitches or overlock throughout, and bias-bound neckline and armholes.

Fabric Recommendations

Medium-stretch knit fabrics from natural or blended fibres; knit lace for the side front panels and upper back. Sew with a stretch or narrow zigzag stitch or on a 3- or 4-thread overlocker; topstitch hems with a twin needle.

Additional Supplies

  • Knit lace
  • Bias tape, 4 cm wide (or cut from fabric), for the neckline and armholes

Cutter’s Must

From Main Fabric:

  1. Back Yoke – 2 pieces
  2. Lower Center Back – 2 pieces
  3. Side Back – 2 pieces
  4. Center Front – 1 piece on fold
  5. Sleeve – 2 pieces
  6. Front Yoke – 2 pieces

From Lace:

  1. Side Front – 2 pieces
  2. Upper Back – 1 piece on fold

Assembly Instructions

1. Front

Stitch the darts on the Center Front.
Trim the dart intake and press upward.

Attach the Side Front to the Center Front.
Overlock the seam allowance and press toward the center.

Attach the Front Yoke to the Center Front.
Overlock the seam allowance and press toward the yoke.

2. Back

Stitch and overlock the princess seam on the Lower Center Back and Side Back.
Press the seam allowance toward the center.

Stitch and overlock the center back seam of the lower section.

Attach the Upper Back to the lower section.
Overlock the seam allowance and press downward.

Attach the Back Yoke to the Back.
Overlock the seam allowance and press toward the yoke.

3. Neckline and Shoulders

Stitch the right shoulder seam, overlock the seam allowance and press toward the Back.

Cut a bias strip 4 cm wide and with a length equal to the neckline length + 5 cm (if not using ready-made).

Fold the bias strip lengthwise, right side out, and press.

Place the bias strip onto the neckline from the right side and stitch.

Clip seam allowances.

Turn the bias strip to the wrong side and topstitch along the fold onto the garment.

Press the seam.

Stitch the left shoulder seam, overlock the seam allowance and press toward the Back.

4. Sleeves

Overlock the sleeve hem, turn to the wrong side and topstitch.

Set the Sleeve into the armhole.

5. Side Seams

Stitch the side seams, overlock the seam allowances and press toward the Back.

6. Armholes

Cut a bias strip 4 cm wide and with a length equal to the armhole length + 5 cm (if not using ready-made).

Fold the bias strip lengthwise, right side out, and press.

Place the bias strip onto the armhole from the right side and stitch.

Clip seam allowances.

Turn the bias strip to the wrong side and topstitch along the fold onto the garment.

Press the seam.

7. Hem

Overlock the lower edge of the garment.

Turn to the wrong side, press, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?