Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4397
#4400

V-Neck Cap Sleeve Pleated Sheath Dress

Pattern #4399

A women's knee-length sheath dress with short cap sleeves and a crossover V-neckline. The centre front overlaps a separate left front and is folded into pleats that fan towards one side; the back closes with a concealed zipper. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres.

Tech. Description

V-Neck Cap Sleeve Pleated Sheath Dress

A women's knee-length sheath dress with short cap sleeves and a crossover V-neckline. The centre front overlaps a separate left front and is folded into pleats that fan towards one side; the back closes with a concealed zipper.

When To Wear

  • To the office in warm weather, or under a jacket the rest of the year.
  • For dinners, receptions and family celebrations.

Key Design Features

Silhouette: Fitted sheath, shaped by princess seams on the front and back.

Length: Knee length.

Neckline: Crossover V-neck, finished with bias binding folded in half and topstitched along the fold on the inside.

Sleeves: Short cap sleeves, set in, with a turned-up hem; the armhole seam is finished with bias binding.

Front: The centre front panel, with pleats turned downwards, lies over the left front, and both are caught into the front princess seams.

Back: Centre back seam and two princess seams.

Closure: Concealed zipper in the upper part of the centre back seam.

Level Of Difficulty

Intermediate. Pleats laid to marks, a layered front joined in the princess seams, bias-bound neckline and armholes, concealed zipper.

Fabric Recommendations

Dress fabrics in natural or blended fibres.

Additional Supplies

  • Concealed zipper
  • Bias binding, 4 cm wide (or cut from the dress fabric): the neckline length is marked on the left front piece; for each armhole, the armhole length plus 5 cm

Cutter's Must

From main fabric:

  • 1. Center back – 2 pieces
  • 2. Side back – 2 pieces
  • 3. Side front – 2 pieces
  • 4. Center front -1 piece
  • 5. Left front — 1 piece
  • 6. Sleeve – 2 pieces

Sewing Instructions

  1. Serge the center back seam allowances separately. Stitch from the zipper mark to the bottom. Press the seam allowance open. Insert the zipper. Stitch the back princess seam. Serge the seam allowance and press towards the center.
  2. On the center front, create and secure the pleats. Direct the pleat depths downwards.
  3. Stitch the shoulder seams. Serge the seam allowances and press towards the back.
  4. Serge the bottom edge of the left front. Cut a bias binding 4 cm wide and the length indicated on the front (if not pre-made). Fold the bias binding in half lengthwise, right sides out, and press. Place the bias binding along the neckline edge, right side to right side, and stitch. Clip the seam allowances. Fold the bias binding to the wrong side and topstitch along the fold to the main piece. Press the seam. Overlap the center front onto the left front and secure along the princess seams. Stitch the front princess seams. Serge the seam allowances and press towards the side seams.
  5. Stitch the side seams. Serge the seam allowances and press towards the back.
  6. Serge the bottom edge of the sleeve. Fold the seam allowance to the wrong side and topstitch. Set the sleeves into the armholes, aligning the notches. Press and serge the seam allowances. Cut a bias binding 4 cm wide and a length equal to the armhole length + 5cm (if not pre-made). Fold the bias binding in half lengthwise, right sides out, and press. Place the bias binding along the armhole edge, right side to right side, and stitch. Clip the seam allowances. Fold the bias binding to the wrong side and topstitch along the fold to the main piece. Press the seam.
  7. Serge the bottom edge of the garment. Fold to the wrong side, press, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?