Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4399
#4401

Boat Neck Cap Sleeve Pleated A-Line Dress

Pattern #4400

A women's dress in low-stretch knit with a wide boat neckline, cut-on cap sleeves, a waist seam and a flared skirt laid in inverted pleats at the front and back. Worn with a narrow self-fabric belt threaded through a buckle. Drafted to your own measurements. Recommended fabric: low-stretch knit fabrics from natural or blended fibres.

Tech. Description

Elegant Pleated A-Line Dress

A women's dress in low-stretch knit with a wide boat neckline, cut-on cap sleeves, a waist seam and a flared skirt laid in inverted pleats at the front and back. Worn with a narrow self-fabric belt threaded through a buckle.

When To Wear

  • Daytime events, garden parties, graduations and family celebrations in spring and summer.
  • For the office with a fitted cardigan or short jacket over the shoulders.

Key Design Features

Silhouette: Fitted bodice with a waist seam and an A-line skirt.

Length: Just below the knee.

Neckline: Wide boat neckline, finished together with the armholes by one fused facing.

Sleeves: Short cap sleeves cut in one with the bodice; no separate sleeve pieces.

Front: Upper front shaped with darts; lower front cut on the fold and laid in inverted pleats along the waist seam.

Back: Upper back with darts, lower back with inverted pleats; centre back seam from neckline to hem with an invisible zipper.

Waist: Seam at the natural waist, seam allowances pressed up; separate belt sewn as a tube, turned through and threaded through a decorative buckle.

Finishing: Facing tacked to the side seam allowances and to the zipper tape; hem turned up and topstitched.

Level Of Difficulty

Intermediate. Inverted pleats matched to the waist seam, an all-in-one neck and armhole facing stitched in two steps, and an invisible zipper in knit fabric.

Fabric Recommendations

Low-stretch knit fabrics from natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (front and back neckline facings)
  • Decorative buckle

Cutter's Must

From main fabric:

  • Upper Back – 2 pieces
  • Lower Back – 2 pieces
  • Upper Front – 1 piece
  • Lower Front – 1 piece (on fold)
  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece
  • Waistband (belt) – 1 piece

From fusible interfacing:

  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Back Neckline Facing and Front Neckline Facing pieces.
  2. Stitch the darts on the Upper Back pieces, trim the dart depths to 1 cm and press towards the center. On the Lower Back pieces, fold and secure the inverted pleats. Stitch the Upper Back to the Lower Back pieces, press the seam allowances upwards and serge.
  3. Serge the center back edges separately. Stitch the center back seam from the zipper mark to the hem, press the seam allowances open. Insert the invisible zipper.
  4. Stitch the darts on the Upper Front, trim the dart depths to 1 cm and press towards the center. On the Lower Front, fold and secure the inverted pleats. Stitch the Lower Front to the Upper Front, press the seam allowances upwards and serge.
  5. Stitch side and shoulder seams, press seam allowances towards the back and serge.
  6. Stitch shoulder and side seams of the facings. Press seam allowances open. Serge the center back edges and the outer edge of the facing. Place the dress and facing right sides together and stitch the neckline. Clip seam allowances at curves, turn the facing out, straighten and press. Stitch the armhole in two steps: first the back, then the front. Clip seam allowances at curves, turn out, press. Secure the facing to the garment at the side seam allowances. Attach the facing to the zipper tape.
  7. Serge the bottom edge of the dress, press to the wrong side and topstitch.
  8. Fold the Waistband (belt) in half lengthwise, right sides together, and stitch, leaving a small opening for turning. Trim seam allowances at corners, turn the belt right side out and press. Sew the opening closed. Thread the belt through the buckle and secure.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?