Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4395
#4397

Keyhole Mandarin Collar Contrast Panel Dress

Pattern #4396

A women's fitted knee-length dress with a mandarin stand collar fastened with a button and loop above a teardrop keyhole. The centre front panel is cut from a second fabric colour and framed by curved princess seams. Drafted to your own measurements. Recommended fabric: dress fabrics in two colours, natural or blended fibres: one for the centre front panel, the other for the rest of the dress.

Tech. Description

Keyhole Mandarin Collar Dress

A women's fitted knee-length dress with a mandarin stand collar fastened with a button and loop above a teardrop keyhole. The centre front panel is cut from a second fabric colour and framed by curved princess seams.

When To Wear

  • For work and daytime meetings, with court shoes.
  • For dinners and receptions, in spring and summer or under a jacket in cooler months.

Key Design Features

Silhouette: Fitted sheath, shaped by princess seams on the front and back.

Length: Knee length.

Collar: Mandarin stand collar, interfaced on the outer side, with a button and a loop sewn into its upper edge at the front.

Neckline: Teardrop keyhole on the centre front, finished with an interfaced facing.

Front: Centre front panel cut on the fold from the contrast fabric; curved princess seams run from the shoulders past the bust to the hem, joining it to the side fronts.

Sleeves: Short one-piece set-in sleeves ending above the elbow, with a turned-up hem.

Back: Centre back seam and two princess seams from the armholes to the hem.

Closure: Zipper in the left side seam, plus the button and loop at the collar.

Level Of Difficulty

Intermediate. Faced keyhole opening, stand collar with an inserted loop, curved princess seams, side zipper.

Fabric Recommendations

Dress fabrics in two colours, natural or blended fibres: one for the centre front panel, the other for the rest of the dress.

Additional Supplies

  • Zipper
  • 1 button
  • Fusible interfacing (outer collar stand, neckline facing)

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: hem allowance – 2.0 cm, sleeve hem – 2 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

From main fabric:

  • Center back – 2 pieces
  • Side back – 2 pieces
  • Side front – 2 pieces
  • Sleeve – 2 pieces
  • Collar stand 2 pieces
  • Neckline facing — 1 piece

From main fabric 2:

  • Center front – 1 piece on fold

From fusible interfacing:

  • Collar stand – 1 piece
  • Neckline facing — 1 piece

Sewing Instructions

  1. Interface the outer collar stand and neckline facing.
  2. Stitch and overlock the center back seam. Press the allowance to the left side. Stitch the back princess seam. Overlock the allowance and press towards the center.
  3. Overlock the lower edge of the neckline facing. Place the facing on the center front and stitch the neckline. Vertically cut the allowance of the 'teardrop' opening. Clip the facing allowance, turn to the wrong side and press. Secure the facing and center along the princess seams. Stitch the front princess seams. Overlock the allowance and press towards the center.
  4. Stitch the shoulder seams. Overlock the allowances and press towards the back.
  5. Stitch the right side seam. Overlock the allowance and press towards the back. Stitch the left side seams separately on each piece. Stitch the left side seam from the armhole to the mark and from the mark to the bottom. Press the allowances open, pressing the slit. Insert the zipper.
  6. Process the loop. Fold the collar stand pieces right sides together and stitch along the upper edge, inserting the loop. Trim the allowances, turn to the right side and press. Stitch the outer collar stand to the neckline. Fold under the allowance of the inner collar stand and topstitch into the seam of the outer collar stand attachment.
  7. Stitch the sleeve seam. Press and overlock the allowance. Set the sleeves into the armholes, matching the notches. Press and overlock the allowances.
  8. Overlock the lower edge of the garment and the lower edge of the sleeve. Fold to the wrong side, press and topstitch. Sew the button onto the collar stand.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?