Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4393
#4395

Long Sleeve Asymmetric Draped Dress

Pattern #4394

A women's knee-length fitted knit dress with long set-in sleeves and a wide boat neckline. The front is cut in two parts joined by a curved diagonal seam, gathered on both sides of it and marked by two decorative buttons. Drafted to your own measurements. Recommended fabric: knit fabric with low stretch and good drape, in natural or blended fibres.

Tech. Description

Long Sleeve Asymmetric Draped Dress

A women's knee-length fitted knit dress with long set-in sleeves and a wide boat neckline. The front is cut in two parts joined by a curved diagonal seam, gathered on both sides of it and marked by two decorative buttons.

When To Wear

  • To the office in autumn and winter, with tights and court shoes or boots.
  • For dinners and family celebrations.

Key Design Features

Silhouette: Fitted, straight to the hem.

Length: Knee length.

Neckline: Wide boat neckline finished with interfaced facings attached at the back to the zipper tape.

Sleeves: Long, one-piece set-in sleeves with a turned-up hem.

Front: Upper and lower front pieces joined by a curved seam that runs diagonally across the waist; the upper front is gathered towards the seam at one side, the lower front at the other side, so the folds fan out in opposite directions. Two decorative buttons sit on the seam.

Back: Centre back seam and two princess seams from the armholes to the hem.

Closure: Zipper in the upper part of the centre back seam.

Finishing: Seams sewn with a stretch or narrow zigzag stitch or on an overlocker; dress and sleeve hems topstitched with a twin needle or on a coverstitch machine.

Level Of Difficulty

Intermediate. Gathering between marks and joining it to a curved seam, a zipper in knit fabric, faced neckline.

Fabric Recommendations

Knit fabric with low stretch and good drape, in natural or blended fibres.

Additional Supplies

  • Knit fusible interfacing (neckline facings)
  • Zipper
  • 2 buttons

Cutter's Must

From main fabric:

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Upper Front – 1 piece
  • Lower Front – 1 piece
  • Sleeve – 2 pieces
  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

From fusible interfacing:

  • Back Neckline Facing – 2 pieces
  • Front Neckline Facing – 1 piece

Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.8 cm. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlock machine.

Sewing Instructions

  1. On the Upper Front, sew a line of long, loose stitches between the upper marks and pull up the gathers. On the Lower Front, sew a line of long, loose stitches between the lower marks and pull up the gathers. Stitch the Upper Front and Lower Front together, press the seam allowances and serge.
  2. Serge the center back edge separately on each Center Back piece. Stitch the center back seam from the zipper mark to the hem. Press the seam allowances open, pressing the opening as well. Insert the zipper.
  3. Stitch the princess seams of the back (Center Back to Side Back), press the seam allowances towards the center and serge.
  4. Stitch the shoulder seams, press the seam allowances towards the back and serge. Stitch the side seams, press the seam allowances towards the back and serge.
  5. Stitch the shoulder seams of the Front Neckline Facing and Back Neckline Facings, press the seam allowances open. Serge the outer edge. Place the facing on the dress right sides together and stitch the neckline edge. Clip the seam allowances at the curves, turn the facing to the wrong side and press. Attach the center back edges of the facing to the zipper tape.
  6. Stitch the Sleeve seams. Press the seam allowances to one side and serge.
  7. Set the Sleeves into the armholes, matching the notches. Press the seam allowances and serge.
  8. Serge the bottom edge of the dress and the bottom edge of the Sleeves. Fold the hem allowances to the wrong side, press and topstitch.
  9. Sew on the two decorative buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?