Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4368
#4371

Shawl Collar Sleeveless Asymmetrical Peplum Blouse

Pattern #4369

A sleeveless women's blouse with princess seams front and back, a wide collar set into the neckline, a four-button front and a peplum with a pleated cascade on one side of the front. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres with added elastane.

Tech. Description

Shawl Collar Sleeveless Asymmetrical Peplum Blouse

A sleeveless women's blouse with princess seams front and back, a wide collar set into the neckline, a four-button front and a peplum with a pleated cascade on one side of the front.

When To Wear

  • At the office in spring and summer, over a fitted skirt or slim trousers.
  • Under an open jacket or cardigan in cooler weather.

Key Design Features

Silhouette: Fitted bodice shaped by princess seams, with a seam at the waist where the peplum is attached.

Length: Hip length, the front peplum dipping lower on the side with the cascade.

Collar: Wide collar cut double, set into the neckline and finished with front facings and a back neck facing; it meets the front edge in a small notch above the first button.

Sleeves: Sleeveless; armholes bound with a double-folded bias strip turned to the inside and topstitched.

Front: Centre front opening with four buttons and buttonholes, continuing through the peplum.

Back: Centre back seam and princess seams; back peplum cut in one piece.

Waist: Peplum in three pieces (back, right front, left front). A pleat on one front piece creates the asymmetric cascade; the front edges of the peplum are turned in and topstitched.

Finishing: Lower edge of the peplum bound with a double-folded bias strip 4 cm wide.

Level Of Difficulty

Intermediate. A collar set between the bodice and facings, princess seams, a pleated asymmetric peplum and bias-bound edges.

Fabric Recommendations

Dress fabrics of natural or blended fibres with added elastane.

Additional Supplies

  • Fusible interfacing (upper collar, front facings, back neck facing)
  • 4 buttons
  • Bias binding 4 cm wide for the armholes and peplum hem (or cut from the main fabric)

Cutter's Must

From main fabric:

  • 1. Center back - 2 pieces
  • 2. Side back - 2 pieces
  • 3. Center front – 2 pieces
  • 4. Side front - 2 pieces
  • 5. Back flounce — 1 piece
  • 6. Right flounce — 1 piece
  • 7. Left flounce -1 piece
  • 8. Back neckline facing — 1 piece
  • 9. Front facing — 2 pieces
  • 10. Collar — 2 pieces

Sewing Instructions

  1. Fuse fusible interfacing to collar, facings, and back neckline facing.
  2. Stitch the princess seams on the back pieces. Finish seam allowances and press towards the center. Stitch the center back seam. Finish seam allowance and press to the left.
  3. Stitch the princess seams of the front. Finish seam allowances and press towards the center.
  4. Stitch the side and shoulder seams. Finish seam allowances and press towards the back.
  5. Place collar pieces right sides together and stitch along the outer edge. Attach collar to the neckline.
  6. Stitch the shoulder seams of the facing and front facing. Press seam allowances open. Finish the outer edges.
  7. Stitch the flounce seams. Finish seam allowances and press towards the back. Finish the front edges, fold inwards, and topstitch. Form a pleat on the flounce and attach it to the lower edge. Finish seam allowance and press upwards.
  8. Place the front facing on the front and stitch along the front edge and neckline. Turn the front facing and facing to the wrong side and press. Attach the facing to the shoulder seams and the flounce edge.
  9. Cut (if not pre-made) bias binding 4 cm wide and a length equal to the armhole length + 5cm. Fold the bias binding in half lengthwise, right side out, and press. Place the bias binding along the armhole edge, right side together, and stitch. Clip seam allowances. Fold the bias binding to the wrong side and topstitch along the fold to the main piece. Press the seam.
  10. Cut (if not pre-made) bias binding 4 cm wide and a length equal to the lower flounce edge length + 5cm. Fold the bias binding in half lengthwise, right side out, and press. Place the bias binding along the flounce edge, right side together, and stitch. Clip seam allowances. Fold the bias binding to the wrong side and topstitch along the fold to the main piece. Press the seam. Finish buttonholes and sew on buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?