Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4369
#4372

Princess Seam Dress with Funnel Collar and Buttoned Front Overlay

Pattern #4371

A sleeveless women's dress about knee length with princess seams, front and back yokes that rise into a funnel collar, a square front neckline and a curved double-layer overlay on the front trimmed with three buttons. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.

Tech. Description

Princess Seam Dress with Funnel Collar and Buttoned Front Overlay

A sleeveless women's dress about knee length with princess seams, front and back yokes that rise into a funnel collar, a square front neckline and a curved double-layer overlay on the front trimmed with three buttons.

When To Wear

  • At the office and for daytime events, with a belt at the waist.
  • In summer on its own, or over a fine top in cooler months.

Key Design Features

Silhouette: Fitted through the bust and waist by princess seams front and back, slightly flared towards the hem. Recommended: wear with a belt.

Length: About knee length.

Collar: Funnel collar formed by the front and back yokes, the front yokes cut double and interfaced.

Neckline: Square neckline on the centre front panel, finished with an interfaced facing.

Front: A curved overlay, stitched from two layers and turned, is caught into the right princess seam and the yoke seam; three decorative buttons along its edge.

Sleeves: Sleeveless; armholes finished with the facings.

Back: Back yoke with darts, princess seams and a centre back seam.

Closure: Invisible zip in the centre back seam.

Finishing: Hem turned 1 cm, then 2 cm, and topstitched.

Level Of Difficulty

Intermediate. Yokes forming a stand-up collar, an overlay caught into two seams, combined neck and armhole facings and an invisible zip.

Fabric Recommendations

Dress fabrics of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (front yokes, back facings, front neckline facing)
  • Invisible zip
  • 3 buttons

Cutter's Must

From main fabric:

  • Back yoke - 2 pieces
  • Back side - 2 pieces
  • Back center - 2 pieces
  • Front yoke – 4 pieces
  • Front side – 2 pieces
  • Front center - 1 piece
  • Front overlay - 2 pieces
  • Back facing – 2 pieces
  • Front neckline facing – 1 piece

From fusible interfacing:

  • Front yoke – 2 pieces
  • Back facing – 2 pieces
  • Front neckline facing – 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to corresponding pieces.
  2. Stitch darts on back yokes. Press dart allowances towards the center.
  3. Stitch the back princess seams, press seam allowances towards the center and serge. Attach the yoke to the back, press seam allowances upwards and serge.
  4. Serge the center back seam separately on each piece. Stitch the center back seam from the zipper mark downwards. Press open the center seam allowances, pressing the zipper opening. Insert the zipper.
  5. Place the front overlay pieces right sides together and stitch along the outer edge. Clip seam allowances at curves, turn the piece right side out, and press.
  6. Place the neckline facing with the front center piece right sides together and stitch the upper edge. Clip seam allowances at curves, turn the facing to the wrong side, and press.
  7. Stitch the front princess seams, inserting the overlay into the right seam, press seam allowances towards the center, and serge. Attach the yoke to the front, catching the overlay, press seam allowances onto the yoke.
  8. Stitch the shoulder seams, clipping at the curve, press seam allowances towards the back and serge. Stitch the side seams, press seam allowances towards the back and serge.
  9. Stitch the side and shoulder seams of the facings, press seam allowances open, serge the outer edges. Place the facing with the garment wrong sides together and stitch the back neckline edge and the front yoke neckline edge up to the mark. Clip seam allowances at the mark, clip at curves, trim at corners. Turn the facing to the wrong side.
  10. Stitch the armholes in two steps: first the front, then the back. Clip seam allowances at curves. Topstitch the inner front yoke section into the seam of the outer yoke attachment.
  11. Press the dress hem allowance to the wrong side by 1 cm, then by 2 cm, and topstitch.
  12. Sew buttons according to markings.

Tip: The dress is recommended to be worn with a belt.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?