Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4371
#4373

Structured Sheath Dress Peplum Cutout Neckline

Pattern #4372

A sleeveless women's sheath dress with a waist seam, princess seams above and below it, a square front neckline framed by two interfaced lapel-shaped trims, and a peplum that is open at the front and flared at the back. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres with added elastane.

Tech. Description

Structured Peplum Sheath Dress

A sleeveless women's sheath dress with a waist seam, princess seams above and below it, a square front neckline framed by two interfaced lapel-shaped trims, and a peplum that is open at the front and flared at the back.

When To Wear

  • At the office with a jacket, or on its own in warm weather.
  • For receptions, dinners and ceremonies.

Key Design Features

Silhouette: Fitted sheath, shaped by princess seams on both the bodice and the skirt, joined at a waist seam.

Length: Knee length.

Neckline: Square neckline on the centre front panel, finished with a facing. On each side front, a folded trim strip with a notched corner stands beside the neckline like a lapel.

Sleeves: Sleeveless; neckline and armholes finished with all-in-one facings.

Waist: Peplum in two pieces: a left front piece, and a back piece that runs from the right front around the back to the left side seam. The front edges are left open at the centre front panel.

Back: Centre back seam and princess seams on bodice and skirt.

Closure: Invisible zip in the left side seam.

Finishing: Peplum hem turned and topstitched (1.5 cm allowance); dress hem 2 cm, turned and topstitched.

Level Of Difficulty

Intermediate. Many panels to match at the waist seam, trims set onto the side fronts, a peplum attached in two stages and a side zip that also catches the peplum edges.

Fabric Recommendations

Dress fabrics of natural or blended fibres with added elastane.

Additional Supplies

  • Invisible zip
  • Fusible interfacing (trim strips)

Cutter's Must

From main fabric:

  • Upper center back - 2 pieces
  • Lower center back - 2 pieces
  • Upper side back — 2 pieces
  • Lower side back — 2 pieces
  • Upper side front – 2 pieces
  • Upper center front — 1 piece
  • Lower center front - 1 piece
  • Lower side front — 2 pieces
  • Back flounce — 1 piece
  • Front left flounce — 1 piece
  • Back facing — 2 pieces
  • Front facing — 2 pieces
  • Front neckline facing — 1 piece
  • Trim strip — 2 pieces

From fusible interfacing:

  • Trim strip — 2 pieces

Sewing Instructions

  1. Fuse the trim strip with fusible interfacing.
  2. Stitch the princess seams on the upper and lower back PANELs. Finish seam allowances and press towards the center. Stitch the center seam on the upper and lower back PANELs. Finish the seam and press to the left side.
  3. Fold the trim strip in half lengthwise, right sides together, and stitch the upper edge. Trim the seam allowance at the corner, turn right side out, and press.
  4. Finish the lower edge of the front neckline facing. Place the facing on the center and stitch. Trim seam allowances and turn the facing to the wrong side. Press the seam. Place the trim strip on the side front and stitch.
  5. Stitch the princess seams on the front pieces. Finish the seam allowances of the lower and press towards the center. On the upper front, finish the seam allowance, stopping 3-4 cm from the upper edge.
  6. Stitch the shoulder seams, press seam allowances open.
  7. Finish the front edges of the FLOUNCEs. Finish the lower seam allowances of the FLOUNCEs, fold inwards, and topstitch. Place the left front flounce on the right side of the front and stitch according to the notch. Turn the flounce towards the side seam and attach it to the upper and side edges of the lower front.
  8. Stitch the right side seams on the upper and lower parts, press seam allowances towards the back and finish. Place the back flounce on the right side of the front (right) and stitch according to the notch. Turn the flounce towards the side seam and attach it to the upper edge of the front and back. (The back flounce extends to the left side seam)
  9. Finish the left side seam separately, catching the flounce edges, and stitch from the notch to the bottom. Insert the zipper.
  10. Stitch the center seam of the back facing. Press the seam allowance open. Stitch the shoulder and right side seams of the FACINGs. Press seam allowances open. Finish the right side seams and the lower edge of the FACINGs. Place the facing on the dress and stitch the neckline. Clip seam allowances, turn the facing to the wrong side, and press. Stitch the armholes in 2 steps: first the front armhole, then the back armhole. Clip seam allowances and press. Sew the facing sections to the zipper tape.
  11. Finish the hem allowance of the dress, press to the wrong side, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?