Summer Coat with Concealed Closure
A women's fully lined, above-knee coat with a notched collar and lapels, a six-button concealed fly front and two-piece set-in sleeves. Front princess seams and a horizontal waist seam, with pleats in the lower front and back.
When To Wear
- In late spring, summer evenings and early autumn over dresses or trousers.
- With a belt at the waist seam for town and office.
Key Design Features
Silhouette: Fitted through the bodice by princess seams and back darts, fuller below the waist seam.
Length: Above the knee.
Collar: Notched collar with lapels; upper collar fused. The front edge seam allowance is understitched 0.2 cm from the seam: to the facing along the closure, to the front along the lapels.
Closure: Concealed fly front with 6 buttons on the left front. The buttonholes sit behind a framed opening in the right facing, with bar tacks between each pair; topstitched along the fly.
Front: Princess seams from the armhole to the waist seam; the lower front has a pleat turned towards the side seam.
Sleeves: Two-piece set-in sleeves with elbow and front seams, eased at the cap; shoulder pads and sleeve heads.
Back: Upper back in two pieces with darts and a centre back seam; lower back cut on the fold with a centre pleat.
Lining: Full lining of body and sleeves, sewn to the front facings and back neck facing and bagged at the hem.
Level Of Difficulty
Advanced. A framed concealed buttonhole fly, a notched collar set between coat and facing, two-piece sleeves with shoulder pads and a bagged full lining.
Fabric Recommendations
Suiting fabrics of natural or blended fibres.
Additional Supplies
- Lining fabric
- Fusible interfacing (centre front, upper collar, front facings, back neck facing, fly facing, armhole areas and hem allowances)
- Shoulder pads
- Sleeve heads
- 6 buttons
Cutter's Must
From main fabric:
- Upper Back – 2 pieces
- Lower Back – 1 piece on fold
- Center Upper Front – 2 pieces
- Side Upper Front – 2 pieces
- Lower Front – 2 pieces
- Back Neckline Facing – 1 piece
- Center Front Facing – 2 pieces
- Upper Sleeve – 2 pieces
- Lower Sleeve – 2 pieces
- Lower Collar – 1 piece
- Upper Collar – 1 piece
From lining fabric:
- Upper Back – 2 pieces
- Lower Back – 1 piece on fold
- Center Upper Front – 2 pieces
- Side Upper Front – 2 pieces
- Lower Front – 2 pieces
- Upper Sleeve – 2 pieces
- Lower Sleeve – 2 pieces
- Hidden Button Placket Lining – 2 pieces
Attention: the lining pieces are cut minus the width of the front facing and the back neckline facing.
From fusible interfacing: Center Upper Front, Upper Collar, Center Front Facing, Back Neckline Facing, Hidden Button Placket Lining – 1 piece, armhole areas and hem allowances.
Sewing Instructions
- Fuse interfacing to the pieces listed above.
- Stitch the darts on the Upper Back. Press the darts towards the centre back. On the Lower Back, fold the inverted pleat at the markings and baste it. Stitch the Lower Back to the Upper Back. Press the seam allowances upwards.
- Stitch the front princess seams (Center Upper Front to Side Upper Front). Press the seam allowances towards the centre front. On the Lower Front, fold the pleat at the markings, with its depth turned towards the side seam. Stitch the Lower Front to the upper front and press the seam allowances upwards.
- Mark the fly opening with three lines on the right side of the right Center Front Facing: the first line runs parallel to the front edge, 1.5 cm from the finished edge; the second and third lines mark the length of the opening. Place the interfaced Hidden Button Placket Lining on the right side of the facing, right side down, extending away from the front edge, with its raw edge on the marked line. Stitch 0.5 cm from the marked line along the opening, between the lines that mark its length. Place the second Hidden Button Placket Lining edge to edge against the first stitching line and stitch 0.5 cm from it. Check from the wrong side that the two stitching lines are parallel. Cut the opening. Make diagonal cuts 1–1.5 cm from the ends of the opening. Turn the placket pieces through the opening to the wrong side, forming a frame from the interfaced piece as wide as the space between the stitching lines. Stitch in the ditch of its seam to secure it. Press the second placket piece towards the inner edge of the facing and stitch it 0.1 cm from its seam. Mark and make the buttonholes; they are worked through the facing together with the interfaced placket piece. Straighten the ends of the opening and secure them from the wrong side with a double backstitch across the base of the corners. Stitch the edges of the placket pieces together. Make a bar tack between each pair of buttonholes, as long as the frame is wide. Press the facing.
- Place the Center Front Facing on the front, right sides together, pin, and stitch along the front edge, stitching from the front side up to the notch that marks the end of the collar seam. Stitch the lower ends of the facings to the front exactly along the marked hemline. Trim the seam allowances at the upper and lower corners. Understitch the front edge seam allowance 0.2 cm from the seam: along the closure onto the facing, along the lapels onto the front. Turn the front edges right side out and ease out the seams.
- Stitch the side and shoulder seams of the coat. Press the seam allowances open.
- Place the Upper Collar and Lower Collar right sides together and stitch along the ends and the outer edge. Start and end the seam exactly at the marked neckline seam line. Turn the collar right side out and press.
- Stitch the shoulder seams of the Back Neckline Facing and the Center Front Facings. Press the seam allowances open. Stitch the Upper Collar to the neckline of the coat and the Lower Collar to the neckline of the facings. Press the seam allowances open. Tack the collar seam allowances together close to the seams.
- Stitch the elbow seam of the sleeve (Upper Sleeve to Lower Sleeve) and press it open. Stitch the front sleeve seam and press it open. Set the sleeves into the armholes, easing the top of the sleeve cap and matching the notches. Attach the shoulder pads and sleeve heads.
- Sew the lining pieces together in the same way as the coat, leaving an opening in the front seam of the right sleeve. Stitch the lining to the inner edges of the Center Front Facings and the Back Neckline Facing. Stitch the lining to the coat hem.
- Stitch the lining to the sleeve hems. Turn the coat right side out. Close the turning opening.
- Topstitch along the concealed fly. Sew the buttons on the left front.