Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4359
#4361

Asymmetric Stand Collar Cap Sleeve Sheath Dress

Pattern #4360

A women's fitted, knee-length sheath dress with short cap sleeves and an asymmetric stand collar whose ends overlap by 2 cm and are held with a button. The front has a seam under the bust; the dress closes with a concealed zipper in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres with added elastane.

Tech. Description

Asymmetric Stand Collar Sheath Dress

A women's fitted, knee-length sheath dress with short cap sleeves and an asymmetric stand collar whose ends overlap by 2 cm and are held with a button. The front has a seam under the bust; the dress closes with a concealed zipper in the left side seam.

When To Wear

  • At the office and for business meetings, on its own or under a jacket.
  • For daytime events and dinners in spring and summer.

Key Design Features

Silhouette: Fitted sheath shaped with darts on the front and back.

Length: Knee length; 3 cm hem, hand-finished with blind stitches.

Collar: Asymmetric stand collar, folded lengthwise and fused, with the ends lapped 2 cm and a button sewn at the front.

Sleeves: Short set-in cap sleeves, hems turned up and topstitched; armholes bound with a 4 cm bias strip folded in half.

Front: Upper and lower front joined by a seam under the bust, both with darts.

Closure: Concealed zipper in the left side seam, with bar tacks at armhole level.

Back: Centre back seam, darts, upper and lower back pieces.

Level Of Difficulty

Intermediate. An overlapping stand collar, a concealed side zipper, set-in cap sleeves with bias-bound armholes and a blind-stitched hem.

Fabric Recommendations

Dress fabrics of natural or blended fibres with added elastane.

Additional Supplies

  • Concealed zipper
  • Thin knit fusible interfacing (upper collar)
  • 1 button
  • Bias binding, 4 cm wide (or cut from the fabric)

Cutter's Must

From main fabric:

  • Back upper - 2 pieces
  • Back lower - 2 pieces
  • Front upper – 1 piece
  • Front lower - 1 piece
  • Collar — 2 pieces
  • Sleeve — 2 pieces

From fusible interfacing:

  • Collar — 1 piece

Sewing Instructions

  1. Fuse the upper collar with fusible interfacing.
  2. Stitch darts on back pieces. Press darts towards the center seam. Stitch the center seam on the upper and lower back parts. Overlock the seam and press to the left side. Stitch the upper and lower back parts. Press the seam downwards and overlock.
  3. Stitch darts on front pieces. On the upper front parts, trim the dart depth and overlock. Press darts towards the center of the front.
  4. Stitch shoulder seam allowances, press seam allowances towards the back and overlock.
  5. Fold the collar lengthwise with right sides together and stitch around. Turn the collar right side out and press. Attach the collar to the neckline, matching notches. Note! The collar edges overlap by 2 cm.
  6. Overlock the lower sleeve seam allowance, fold inwards and topstitch. Set the sleeve into the armhole.
  7. Cut (if not pre-made) a bias binding 4 cm wide and with a length equal to the armhole length + 5 cm. Fold the bias binding in half lengthwise with the right side out and press. Place the trim strip with the armhole edge right sides together and stitch around. Clip the seam allowances. Fold the trim strip to the wrong side and topstitch along the fold to the main piece. Press the seam.
  8. Stitch the upper and lower front parts. Press seam allowances downwards and overlock.
  9. Stitch the right side seam, press seam allowances towards the back and overlock. Overlock the left side seam separately, stitch from the notch to the bottom. Insert the zipper. Place bar tacks at the side seam at the armhole level.
  10. Overlock the hem seam allowance of the dress, press to the wrong side and hem with blind stitches. Sew a button onto the collar.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?