Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4343
#4345

V-Neck Pleated Zipper Dress

Pattern #4344

A women's fitted above-the-knee dress with short cap sleeves and an asymmetric front: a diagonal seam runs from the neckline to the hem, covered by a decorative separating zipper, with folded pleats on one side and an open split at the hem. An invisible zipper closes the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, in natural or blended fibres.

Tech. Description

V-Neck Pleated Zipper Dress

A women's fitted above-the-knee dress with short cap sleeves and an asymmetric front: a diagonal seam runs from the neckline to the hem, covered by a decorative separating zipper, with folded pleats on one side and an open split at the hem. An invisible zipper closes the left side seam.

When To Wear

  • To the office, alone in summer or under a jacket in cooler months.
  • For dinners and daytime events with heeled shoes.

Key Design Features

Silhouette: Fitted sheath, shaped by princess seams at the back and the diagonal seam at the front.

Length: Above the knee.

Neckline: Wide shaped neckline dipping to a shallow V at the front, finished with interfaced front and back facings that are hand-tacked at the shoulder and centre back seams.

Sleeves: Short cap sleeves; armhole and sleeve cap seam trimmed to 0.7 cm and bound all round with a bias strip 3.5 cm wide.

Front: Three pieces: a right front with pleats laid along the diagonal seam, all folded upwards, a left front and a left upper front. The lower front edges are cut on the bias, turned under and topstitched, forming an open split at the hem.

Closure: Invisible zipper in the left side seam. The separating zipper on the front is decorative, topstitched over the seam.

Back: Centre back seam and princess seams.

Finishing: Sleeve and dress hems turned and topstitched.

Level Of Difficulty

Intermediate. Laying pleats to notches along a diagonal seam, an invisible zipper in the side seam, a surface-applied zipper and bias-bound armholes.

Fabric Recommendations

Dress fabrics with good drape, in natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Decorative separating zipper
  • Fusible interfacing (front and back neckline facings)

Cutter's Must

From main fabric:

  • Left front - 1 piece
  • Right front - 1 piece
  • Left upper front - 1 piece
  • Center back - 2 pieces
  • Side - 2 pieces
  • Sleeve - 2 pieces
  • Back neckline facing – 1 piece
  • Front neckline facing – 1 piece

From fusible interfacing:

  • Back neckline facing – 1 piece
  • Front neckline facing – 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to the back and front neckline facings.
  2. Stitch the center back seam, press seam allowances to the left side and overlock. Stitch the back princess seams, press seam allowances towards the center and overlock.
  3. On the right front, create and secure pleats along the princess seam as follows: join the two lower notches together, directing the resulting inner edge upwards. Pin the pleat. Join the next two lower notches together and pin (directing the inner edge upwards), and so on. The inner edges of all pleats are directed upwards.
  4. Stitch the left upper front to the right, press seam allowances upwards and overlock. Stitch the front princess seam. Clip the seam allowance at the lower notch of the right front. Press seam allowances away from the center and overlock.
  5. Overlock the lower bias edges of the front, press to the wrong side and topstitch. Place the decorative zipper on the princess seam and topstitch.
  6. Stitch the shoulder seams, press seam allowances towards the back and overlock. Overlock the left side seams separately, stitch from the armhole to the first notch and from the second notch to the hem. Press seam allowances open, pressing the slit for the zipper. Insert the zipper. Stitch the right side seams, press seam allowances towards the back, overlock.
  7. Stitch the shoulder seams of the facings. Press seam allowances open and overlock. Overlock the outer edge of the facings. Place the garment and facing right sides together, aligning the neckline edges. Stitch the neckline edge. Clip the seam at the curves, turn the pieces right side out and press. Topstitch the seam allowances to the facing. Secure the facing with hand stitches to the shoulder seams and the center back seam.
  8. Overlock the lower edge of the sleeve, press to the wrong side and topstitch. Set the sleeves into the armholes, press. Trim the armhole and sleeve cap seam allowances to 0.7 cm.
  9. Cut a bias binding 3.5 cm wide and equal in length to the armhole. Bind the armhole all around. Press the seam.
  10. Overlock the lower edge of the garment. Fold to the wrong side, press and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?