Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4344
#4346

Cap Sleeve Panelled Dress

Pattern #4345

A women's above-the-knee fit-and-flare dress with princess seams above and below a shaped waist insert, short cap sleeves and an invisible zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: fluid dress fabrics from natural or blended fibres.

Tech. Description

Cap Sleeve Panelled Dress

A women's above-the-knee fit-and-flare dress with princess seams above and below a shaped waist insert, short cap sleeves and an invisible zipper in the centre back seam.

When To Wear

  • In spring and summer, on its own or with a light cardigan.
  • For daytime events, parties and office days, with low heels or ballet flats.

Key Design Features

Silhouette: Fitted bodice, close at the waist, with a flared skirt.

Length: Above the knee.

Neckline: Round neckline finished with a front facing and a two-piece back facing.

Sleeves: Short cap sleeves set into the upper armhole, their lower edge finished with folded bias binding; the underarm part of the armhole is also bound with bias binding.

Front: Upper bodice cut as a centre panel and two side panels joined by princess seams; a curved waist insert in one piece; a flared lower part of a centre panel and two side panels.

Back: The same panel layout as the front, with a two-piece waist insert and a centre back seam.

Closure: Invisible zipper in the centre back seam.

Finishing: Waist insert seams, back princess seams and upper front princess seams topstitched 0.5 cm from the seam; hem overlocked, turned and stitched.

Level Of Difficulty

Intermediate. Many panel pieces matched at the princess and curved insert seams, an invisible zipper finished with a facing, bias-bound sleeves and armholes.

Fabric Recommendations

Fluid dress fabrics from natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (neckline facings)

Cutter's Must

From main fabric:

  • 1. Center upper back - 2 pieces
  • 2. Side upper back - 2 pieces
  • 3. Back insert - 2 pieces
  • 4. Center lower back - 2 pieces
  • 5. Side lower back - 2 pieces
  • 6. Side upper front - 2 pieces
  • 7. Center upper front – 1 piece
  • 8. Front insert - 1 piece
  • 9. Side lower front - 2 pieces
  • 10. Center lower front – 1 piece
  • 11. Sleeve – 2 pieces
  • 12. Back neckline facing - 2 pieces
  • 13. Front neckline facing - 1 piece

From fusible interfacing:

  • 1. Back neckline facing - 2 pieces
  • 2. Front neckline facing - 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to the corresponding pieces.
  2. Stitch the princess seams on the upper back PANELs, press seam allowances towards the center, serge, and topstitch 0.5 cm from the seam. Attach the back insert to the upper back, press seam allowances towards the insert, serge, and topstitch 0.5 cm from the seam.
  3. Stitch the princess seams on the lower back PANELs, press seam allowances towards the center, serge, and topstitch 0.5 cm from the seam. Attach the lower back to the back insert, press seam allowances towards the insert, serge, and topstitch 0.5 cm from the seam.
  4. Serge the center back edges separately on each piece. Stitch the center back seam from the mark to the lower edge. Press seam allowances open, pressing the slit for the zipper. Insert the zipper.
  5. Stitch the princess seams on the upper front PANELs, press seam allowances towards the center, serge, and topstitch 0.5 cm from the seam. Attach the front insert to the upper front, press seam allowances towards the insert, serge, and topstitch 0.5 cm from the seam.
  6. Stitch the princess seams on the lower front PANELs, press seam allowances towards the center, serge. Attach the lower front to the front insert, press seam allowances towards the insert, serge, and topstitch 0.5 cm from the seam.
  7. Stitch shoulder and side seams, press seam allowances towards the back and serge.
  8. Stitch the shoulder seams of the FACINGs. Press seam allowances open. Serge the outer edge of the FACINGs. Place the dress and facing right sides together, aligning the neckline edges. Stopping 5 mm before the edges of the invisible zipper, fold back the facing and pin it to the upper edge of the dress. On the right side of the dress, fold back the seam allowances along the zipper and pin them to the neckline edge over the facing. Stitch the neckline edge. Clip the seam allowances at curves, turn pieces right side out, and press. Topstitch the seam allowances to the facing. Secure the facing to the zipper tape and to the shoulder seams.
  9. Cut a bias binding 4 cm wide and a length equal to the lower sleeve edge + 4 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the lower sleeve edge, right sides together, and stitch. Fold the binding to the wrong side, clip the seams, and topstitch along the fold to the sleeve. Press the seam. Set the SLEEVEs into the armholes.
  10. Cut a bias binding 4 cm wide and a length equal to the lower armhole + 6 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the armhole edge, right sides together, leaving tails, and stitch. Fold the binding to the wrong side, clip the seams, and topstitch along the fold to the main piece. Press the seam.
  11. Serge the bottom edge of the garment, press to the wrong side, and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?