Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4342
#4344

Draped Crossover Long Sleeve Top

Pattern #4343

A fitted, hip-length women's top in knit fabric with long set-in sleeves and two overlapping fronts that form a draped crossover V-neckline, right front over left. Pulled on over the head, no fastenings. Drafted to your own measurements. Recommended fabric: for knit fabric only: a soft-draping jersey with medium stretch, in natural or blended fibres.

Tech. Description

Draped Crossover Long Sleeve Top

A fitted, hip-length women's top in knit fabric with long set-in sleeves and two overlapping fronts that form a draped crossover V-neckline, right front over left. Pulled on over the head, no fastenings.

When To Wear

  • Autumn to spring, with trousers, jeans or a pencil skirt.
  • At the office or for dinner, under a jacket or on its own.

Key Design Features

Silhouette: Close-fitting through the body and sleeves.

Length: Hip length, straight hem.

Neckline: Crossover V-neck with soft folds on the fronts near the shoulders. The neckline edge is serged, turned under 1.5 cm and topstitched.

Front: Two fronts laid one over the other, right front on top, and basted together at the side seams; no closure.

Sleeves: Long, fitted set-in sleeves, set flat into the open armhole, then sewn up together with the side seam.

Back: One piece, no centre seam.

Finishing: Hem and sleeve ends turned up 1.5 cm and topstitched, with a twin needle to keep them stretchy.

Level Of Difficulty

Beginner. Three pattern pieces and no closures; the main skills are sewing knit fabric with a stretch stitch, zigzag or overlocker and twin-needle hemming.

Fabric Recommendations

For knit fabric only: a soft-draping jersey with medium stretch, in natural or blended fibres.

Additional Supplies

  • Twin needle for hemming (recommended)

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: hem and sleeve hem – 1.5 cm, neckline – 1.5 cm, other seams 0.8 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

From main fabric:

  • Back – 1 piece
  • Front – 2 pieces
  • Sleeve – 2 pieces

Sewing Instructions

Tip: Knit pieces are stitched with a special stretch stitch or a narrow zigzag. Hems are topstitched with a twin needle to keep them elastic. You can also sew the pieces directly on a 3- or 4-thread overlocker.

  1. Stitch the shoulder seams. Serge the allowances and press them towards the Back.
  2. Serge the neckline allowance, turn it to the inside and topstitch.
  3. Lay the Fronts one over the other, right sides up, with the right Front on top. Align the side edges and baste them together 0.5 cm from the edge.
  4. Set the Sleeves into the open armholes, serge the allowance.
  5. Stitch the side seam and the sleeve seam in one continuous seam. Serge the allowances.
  6. Serge the lower edge of the garment and of the sleeves. Turn the allowance to the wrong side, press and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?