Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A knee-length women's pencil dress with short set-in sleeves, a right front lapped over the left along a curved asymmetric edge trimmed with six buttons, and a flap set into a curved seam on the right hip. Invisible zipper and slit at the centre back. Drafted to your own measurements. Recommended fabric: dress fabric in natural or blended fibres.
A knee-length women's pencil dress with short set-in sleeves, a right front lapped over the left along a curved asymmetric edge trimmed with six buttons, and a flap set into a curved seam on the right hip. Invisible zipper and slit at the centre back.
Silhouette: Fitted pencil shape, with darts on the right and left fronts and on both back pieces.
Length: To the knee.
Neckline: Shallow neckline running into the curved front edge, faced and topstitched along marked lines from the right side, the topstitching starting from the centre back seam.
Sleeves: Short set-in sleeves, hemmed 1.5 cm and topstitched.
Front: The right front is cut in two parts, upper and lower, joined by a curved seam. It laps over the left front along a curved, faced edge and is topstitched down, so the six buttons sewn along it are decorative.
Pockets: No pockets; a lined, interfaced flap is caught into the seam between the upper and lower right front.
Closure: Invisible zipper in the centre back seam.
Back: Two back pieces with vertical darts, a centre back seam and a slit at the hem, topstitched along its edges.
Finishing: Hem turned up 2 cm and slipstitched by hand.
Intermediate. Asymmetric fronts that must be lapped and topstitched along marked lines, a curved seam with an inserted flap, shaped facings meeting an invisible zipper, and a back slit.
Dress fabric in natural or blended fibres.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; dress hem allowance 2 cm, sleeve hem allowance 1.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). The labels on the pattern pieces are written on the right side of the fabric!
From main fabric:
The dress is recommended to be worn with a decorative belt.
#4340
Geometric Panel Cap Sleeve Dress

#4344
V-Neck Pleated Zipper Dress
#4345
Cap Sleeve Panelled Dress

#4346
Knit Surplice Dress with Sleeves

#4337
Sleeveless Double-Breasted Trench Dress with Belt

#4347
Sleeveless Sheath Dress with Chevron Front Insets

#4348
Fitted Collared Dress with Flounce

#4349
Fitted Sleeveless Asymmetric Color Block Dress

Minerva Support
Online