Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4337
#4340

Fitted Collared Vest With Back Strap

Pattern #4339

A women's fitted waist-length vest with princess seams, a wide rounded collar in a contrast fabric around a deep scoop neckline, a three-button front with pointed ends and a half-belt at the back. Fully lined. Drafted to your own measurements. Recommended fabric: suiting fabrics in natural or blended fibres, with a coordinating fabric for the collar, strap and welt.

Tech. Description

Fitted Collared Vest With Back Strap

A women's fitted waist-length vest with princess seams, a wide rounded collar in a contrast fabric around a deep scoop neckline, a three-button front with pointed ends and a half-belt at the back. Fully lined.

When To Wear

  • Over a shirt or blouse with trousers or a skirt, for the office.
  • As part of a suit with matching trousers, or on its own with a fitted top in warm weather.

Key Design Features

Silhouette: Fitted, shaped by princess seams at front and back.

Length: Waist length; the fronts end in points below the last button, the back hem is straight.

Collar: Wide rounded collar with a centre back seam, cut from a second, contrast fabric, interfaced and topstitched along its edge. It lies around a deep scoop neckline.

Sleeves: Sleeveless, armholes faced by the lining.

Closure: Single-breasted, 3 buttons with buttonholes.

Pockets: A single welt in the contrast fabric on the left front, stitched on along its lower edge and topstitched at the short ends.

Back: Centre back seam and princess seams; a two-part strap in the contrast fabric is caught in the back princess seams.

Finishing: Front edges and hem topstitched 2.5 cm from the edge.

Lining: Full lining. The front lining is cut from the main fabric and interfaced; the back and side lining pieces are joined to hem facings in the main fabric.

Level Of Difficulty

Intermediate. Princess seams, a collar set between garment and lining, armholes turned through an opening in the side seam (bagged lining).

Fabric Recommendations

Suiting fabrics in natural or blended fibres, with a coordinating fabric for the collar, strap and welt.

Additional Supplies

  • Coordinating fabric (collar, back strap, welt)
  • Lining fabric
  • Fusible interfacing (front lining, back neck facing, collar)
  • 3 buttons

Cutter's Must

From main fabric:

  • Back center – 2 pieces
  • Back side – 2 pieces
  • Front center - 2 pieces
  • Front side – 2 pieces
  • Back neck facing – 1 piece
  • Front lining — 2 pieces
  • Back hem facing — 2 pieces
  • Front side facing — 2 pieces

From main fabric 2:

  • Collar — 4 pieces
  • Strap — 2 pieces
  • Welt — 1 piece

From lining fabric:

  • Back center – 2 pieces
  • Back side – 2 pieces
  • Front side – 2 pieces

Lining pieces are cut according to the main fabric pieces, excluding the bottom facings and the back neck facing.

Attention! The front lining is cut from the main fabric!

From fusible interfacing: front lining, back neck facing, collar - 1 piece.

Sewing Instructions

  1. Fuse interfacing to the designated pieces.
  2. Stitch the princess seams of the front. Press seam allowances towards the center of the front.
  3. Fold the strap in half lengthwise, right sides together, and stitch the long side and one short side. Trim corners, turn the strap right side out, and press.
  4. Stitch the center back seam of the back. Press the seam to the left side. Stitch the princess seams of the back, inserting the strap according to markings. Press seam allowances towards the center of the back.
  5. Stitch the shoulder and side seams. Press seam allowances towards the back.
  6. Stitch the center seam of the collar. Press seam allowances open. Place collars right sides together and stitch along the ends and the outer edge. Trim seam allowances at corners and turn right side out. Press the collar. Topstitch along the contour of the collar.
  7. Place the collar on the neckline of the front and back, align edges, and secure along the seam allowance.
  8. Fold the welt right side together and stitch the short sides. Trim seam allowances and turn right side out. Place the welt on the left front, aligning the attachment line with the lower marking line, and stitch along the lower edge. Turn the welt upwards and stitch along the two short sides.
  9. Stitch the bottom facings to the lining pieces. Press seam allowances upwards. Stitch the lining pieces similarly to the main fabric pieces, leaving an opening in the left side seam. Stitch the back facing to the lining. Place the garment with the lining right sides together and stitch along the front edge, neckline, and bottom.
  10. Stitch the armhole in 2 steps: the back armhole from the shoulder seam to the side seam, and the front armhole from the shoulder seam to the side seam through the opening in the side seam. Close the opening.
  11. Topstitch along the front edge and bottom 2.5 cm from the edge.
  12. On the right front, make buttonholes; on the left front, sew on buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?