Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4339
#4341

Geometric Panel Cap Sleeve Dress

Pattern #4340

A women's fitted above-the-knee dress in two contrasting colours. The front is pieced from diagonal panels with an inserted band crossing it; cap sleeves sit in the upper armhole, and an invisible zipper closes the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabric in two contrasting colours, in natural or blended fibres with added elastane.

Tech. Description

Geometric Panel Cap Sleeve Dress

A women's fitted above-the-knee dress in two contrasting colours. The front is pieced from diagonal panels with an inserted band crossing it; cap sleeves sit in the upper armhole, and an invisible zipper closes the centre back seam.

When To Wear

  • To the office with heeled shoes, with a jacket in cooler weather.
  • For daytime events and dinners in spring and summer.

Key Design Features

Silhouette: Fitted sheath, slightly narrowing towards the hem.

Length: Above the knee.

Neckline: Wide, shallow boat neckline finished with interfaced front and back facings.

Sleeves: Short cap sleeves set into the upper part of the armhole; the lower armhole is finished with a folded bias strip 4 cm wide, turned inside and topstitched.

Front: Six pieces in two colours: an upper centre piece, left and right side pieces, a lower piece and a diagonal insert band. A bust dart on the left front piece is hidden in the panel layout.

Closure: Invisible zipper in the centre back seam, with the facing attached to the zipper tape.

Back: Two back pieces with a centre back seam, in the second colour.

Finishing: Sleeve hems turned and topstitched; dress hem finished by hand with blind stitches.

Level Of Difficulty

Intermediate. Matching diagonal panel seams, an invisible zipper with a faced neckline, and partial sleeves combined with a bias-bound lower armhole.

Fabric Recommendations

Dress fabric in two contrasting colours, in natural or blended fibres with added elastane.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (neckline facings)

Cutter's Must

From main fabric:

  • Upper center front - 1 piece
  • Front insert - 1 piece
  • Lower front - 1 piece
  • Sleeve - 2 pieces
  • Front neckline facing – 1 piece

From main fabric 2:

  • Back - 2 pieces
  • Left front - 1 piece
  • Right front — 1 piece
  • Back neckline facing – 2 pieces

From fusible interfacing:

  • Back neckline facing – 2 pieces
  • Front neckline facing – 1 piece

Sewing Instructions

  1. Fuse fusible interfacing to the neckline facing pieces.
  2. Stitch the dart on the left front, press the depth downwards.
  3. Attach the left front to the upper center. Overlock the seam allowance and press towards the left.
  4. Stitch the lower and right front PANELs. Overlock the seam allowance and press towards the lower. Attach the front insert to the upper and lower front PANELs. Overlock the seam allowances and press towards the insert.
  5. Overlock the center edges of the back separately on each piece. Stitch the edges from the zipper mark downwards. Press the seam allowances open. Insert the zipper.
  6. Stitch the shoulder and side edges. Overlock the seam allowances and press towards the back.
  7. Stitch the shoulder edges of the FACINGs. Press the seam allowances open and overlock. Overlock the outer edge of the FACINGs. Place the dress with the facing right sides together, aligning the neckline edges. Before reaching 5 mm from the edges of the concealed fastening, fold back the facing and pin it to the upper edge of the dress. On the right side of the dress, fold back the seam allowances along the zipper and pin them to the neckline edge over the facing. Stitch the neckline edge. Clip the seam at the curves, turn the pieces right side out and press. Topstitch the seam allowances to the facing. Secure the facing to the zipper tape.
  8. Overlock the lower edge of the sleeve, press to the wrong side and topstitch. Set the sleeves into the armholes, matching the notches. Clip the seam allowances at the marks, press and overlock.
  9. Cut a bias binding 4 cm wide and a length equal to the length of the lower armhole + 6 cm. Fold the bias binding in half lengthwise with the right side out and press. Place the trim strip with the armhole edge right side together, extending the tails, and stitch. Fold the trim strip to the wrong side, clip the seams and topstitch along the fold to the main piece. Press the seam.
  10. Overlock the hem allowance of the dress, press to the wrong side and hem with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?