Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A fitted, fully lined women's jacket with a shawl collar, a single-button front at the waist and a peplum seamed on at the waist, short and rounded at the front and longer at the back. Princess seams front and back and two-piece set-in sleeves. Drafted to your own measurements. Recommended fabric: suiting fabric with good drape, from natural or blended fibres.
A fitted, fully lined women's jacket with a shawl collar, a single-button front at the waist and a peplum seamed on at the waist, short and rounded at the front and longer at the back. Princess seams front and back and two-piece set-in sleeves.
Silhouette: Fitted to the waist with princess seams on the front and back, then flaring into the peplum.
Length: High-low: the peplum is short and curved away at the front and drops longer at the back.
Collar: Shawl collar cut in one with the centre fronts, joined with a centre back seam and set into the back neckline; the facing collar is made the same way and stitched to the jacket around the front edges and collar edge.
Sleeves: Long two-piece set-in sleeves with an eased cap, 3 cm hem allowance; shoulder pads and sleeve heads.
Closure: Single-breasted, one button at the waist seam with a buttonhole on the right front.
Back: Centre back seam, princess seams and darts in the bodice; the back peplum is one piece.
Waist: Horizontal waist seam joining the bodice to the peplum (lower front and lower back pieces).
Lining: Full lining with lined sleeves. The peplum is lined first and enclosed between the jacket and the lining at the waist; the jacket is turned through an opening in the right lining sleeve.
Intermediate. A cut-on shawl collar with a centre back seam, princess seams, two-piece sleeves with an eased cap, a separately lined peplum and a fully bagged lining.
Suiting fabric with good drape, from natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm. Sleeve hem allowance – 3.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From lining fabric:
Attention: the front and back lining pieces are cut from the main pattern pieces, minus the width of the Center Front Facing and the Back Neckline Facing respectively.

#4303
Wrap Front Jacket with Pleats

#4305
Leather Jacket with Front Zip
#4301
Wrap Front Peplum Jacket

#4308
Tailored Jacket with Mock Double Welt Pockets

#4309
Fitted Paneled Jacket with Flap Pockets

#4296
Stand Collar Zippered Leather Jacket

#4328
Double Breasted Jacket with Wide Lapels

#4329
Fitted Collared Jacket With Sleeves

Minerva Support
Online