Western Yoke Button Down Blouse
Introducing a classic button-down blouse pattern featuring distinctive western-style yokes and practical chest flap pockets.
When To Wear
This versatile blouse is perfect for adding a touch of casual sophistication to a variety of occasions:
- Casual Everyday: Comfortable and stylish for daily wear, offering an effortless yet polished look.
- Smart-Casual Outings: Ideal for weekend brunches, gatherings, or relaxed evenings out.
- Workwear: Can be dressed up for a smart office look when paired with tailored trousers or skirts.
Key Design Features
Silhouette: a relaxed, straight-cut blouse designed for comfortable wear, with a classic fit.
Neckline & Collar: Features a sharp, pointed collar atop a classic collar stand, framing the neckline.
Closure: a full-length front button placket with visible button closures.
Sleeves: Long, full sleeves gathered into wide, buttoned cuffs.
Pockets: Two symmetrical chest patch pockets, each with a pointed flap closure.
Yokes: Defined front and back yokes with a distinct western-inspired pointed shape.
Hem: a classic shirt-tail hem, gently curved at the sides.
Level Of Difficulty
Intermediate. Requires confident sewing skills including precise collar and stand construction, button placket application, setting in sleeves, and creating flap pockets & cuffs.
Fabric Recommendations
Choose lightweight to medium-weight fabrics with a good drape for the best results:
- Blouse fabrics made from natural or blended fibers
Additional Supplies
- Fusible interfacing
- 11 buttons
Cutter's Must
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: Hem allowance for the bottom of the garment and top of the pocket – 2 cm; other seams – 1 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!
- From main fabric:
- Back - 1 piece on fold
- Back yoke – 1 piece
- Front – 2 pieces
- Front yoke – 4 pieces
- Sleeve – 2 pieces
- Collar — 2 pieces
- Collar stand – 2 pieces
- Cuff – 2 pieces
- Placket – 2 pieces
- Pocket – 2 pieces
- From fusible interfacing:
- Collar — 1 piece
- Collar stand – 1 piece
- Cuff – 2 pieces
- Placket – 2 pieces
Sewing Instructions
- Fuse interfacing to the designated pieces.
- Stitch darts on the back, press seam allowances towards the center. Attach the yoke to the back. Overlock seam allowances and press upwards. Topstitch along the yoke 0.5 cm from the seam.
- Form and secure the inverted pleat on the pocket. Overlock the upper edge. Fold the upper edge inwards and topstitch. Fold the side and bottom seam allowances of the pocket inwards. Place the pocket on the right side of the front and topstitch according to markings.
- Place front yokes right sides together in pairs and stitch the lower shaped edge. Clip seam allowances, turn pieces right side out and press. Topstitch along the lower edge 0.5 cm from the edge. Overlock buttonhole. Place the yoke on the right side of the front and secure along the front edge, armhole, and shoulder edges.
- Stitch shoulder and side seams, press seam allowances towards the back and overlock.
- Fold the placket piece in half lengthwise, wrong sides together, and press. Attach the outer side of the placket to the front, press seam allowances towards the placket. Fold the seam allowance of the inner side of the placket inwards and topstitch into the attachment seam.
- Place the upper collar with the undercollar right sides together, stitch the ends and outer edge of the collar. Trim seams, turn collar right side out, shape and press. Place collar stand pieces right sides together, insert the finished collar between them, align notches and stitch, simultaneously stitching the ends of the collar stand. Start and end stitching strictly at the marked line of the collar stand attachment seam. Turn the finished collar right side out and press. Attach the upper collar stand with the collar to the neckline, fold the open edge of the lower collar stand inwards and topstitch into the attachment seam of the upper collar stand.
- Overlock sleeve seams separately. Stitch the sleeve seam from the top to the slit mark. Press seam allowances open. Topstitch along the slit to secure. Set sleeves into armholes, press seam allowances and overlock. Form and secure pleats on the lower edge of the sleeve.
- Place the cuff piece right side in and stitch the side edges. Start and end stitching precisely at the marked line of the cuff attachment seam. Trim seam allowances. Turn the piece right side out, press. Attach the outer side of the cuff to the sleeve, fold the seam allowance of the inner side of the cuff inwards and topstitch into the attachment seam of the outer cuff.
- Fold the bottom hem of the garment inwards by 1 cm, then by another 1 cm and topstitch.
- On the right front, make buttonholes, on the left – sew on buttons. Make buttonholes and sew on buttons on the cuffs and collar stand. Sew buttons on the pockets.
