Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted, lined jacket with a waist seam and an asymmetric front: the right front overlaps with a curved edge and fastens off-centre with four buttons, plus two inner buttons. Shirt-type collar, two-piece sleeves, a pointed lower edge. Drafted to your own measurements. Recommended fabric: suiting fabrics in natural or blended fibres.
A women's fitted, lined jacket with a waist seam and an asymmetric front: the right front overlaps with a curved edge and fastens off-centre with four buttons, plus two inner buttons. Shirt-type collar, two-piece sleeves, a pointed lower edge.
Silhouette: Fitted bodice joined at the waist to a short lower section that flares slightly over the hip.
Length: Hip length; the lower front edges are cut at an angle to points, and the lower back ends in points at the centre back.
Collar: Pointed turn-down collar without a stand, sewn into the neckline and set between the jacket and the facings.
Sleeves: Two-piece set-in sleeves (upper and under sleeve) with the sleeve cap eased in; shoulder pads.
Front: Upper front shaped with darts, joined to a lower front at the waist. The overlap edge is curved and topstitched along its upper part.
Closure: Off-centre: buttonholes on the right front, buttons on the left front; two inner buttonholes on the left front with buttons on the right front hold the underlap.
Back: Centre back seam and princess seams in the upper back, joined at the waist to a one-piece lower back.
Finishing: Front edges and neckline faced; hem and sleeve hem allowance 3 cm, finished with the lining.
Lining: Full lining cut from the main pieces minus the facings, with a turning opening left in the left sleeve elbow seam.
Intermediate. A curved asymmetric front with facings and inner buttons, a collar set between jacket and facings, two-piece sleeves with eased caps and shoulder pads, and a bagged lining.
Suiting fabrics in natural or blended fibres.
From main fabric:
From lining fabric:
Lining pieces are cut according to the main fabric pieces, minus the width of the back neckline facing and center front facing.
From fusible interfacing:

#2681
Winged Sleeve Stand Collar Bolero Jacket
#2680
Cropped Double-Breasted Notched Lapel Jacket
#2689
Classic Button-Front Denim Jacket

#2673
Asymmetrical Zip Lapel Collar Jacket
#2671
Stand Collar Peplum Jacket
#2716
Wrap Pleated Blazer Dress

#2646
Asymmetrical Peplum Jacket with Buckle
#2643
Asymmetrical Wrap Tie Jacket with Pleated Collar

Minerva Support
Online