Rounded Collar Lace Yoke Balloon Sleeve Blouse
Introducing a graceful women's blouse pattern showcasing a delicate lace yoke and elegant balloon sleeves, cinched with long cuffs.
When To Wear
This blouse offers a refined aesthetic, making it a perfect choice for:
- Elegant Everyday Wear: Perfect for elevating a smart-casual ensemble with a touch of sophistication.
- Semi-Formal Gatherings: Suitable for brunches, dinner parties, or events where a polished yet comfortable look is desired.
- Office & Professional Settings: Pairs beautifully with tailored trousers or skirts for a refined work wardrobe.
Key Design Features
Silhouette: Relaxed-fit blouse with a gathered body for a soft, flowing drape.
Collar: Classic rounded Peter Pan collar frames the neckline beautifully.
Yoke: Features intricate front and back yokes crafted from contrasting lace fabric.
Closure: The back neckline includes a single button and rouleau loop closure, creating a subtle keyhole opening.
Sleeves: Two-piece sleeves combine an upper lace panel with a voluminous balloon lower section, gathered into a long cuff.
Body: The front and back main body pieces are gathered where they attach to the lace yoke, creating soft pleats.
Hem: Straight hemline for a clean finish.
Level Of Difficulty
Intermediate. Requires accurate cutting and handling of lace, precise collar construction, bias binding application, and gathering techniques.
Fabric Recommendations
Choose lightweight blouse fabrics that offer a beautiful drape and complement the lace detailing:
- Blouse fabrics made from natural or blended fibers (e.g., silk, viscose, soft cotton blends, crepe)
- Lace fabric for the yoke and upper sleeves, matching the main fabric's tone
Additional Supplies
- Fusible interfacing
- 3 buttons
Cutter's Must
- From main fabric:
- Back - 1 piece with fold
- Front - 1 piece with fold
- Lower sleeve – 2 pieces
- Collar — 4 pieces
- Cuff – 2 pieces
- From lace fabric:
- Back yoke - 1 piece
- Front yoke - 1 piece
- Upper sleeve – 2 pieces
- From fusible interfacing:
- Collar — 2 pieces
- Cuff – 2 pieces
Sewing Instructions
- Fuse interfacing to the designated pieces.
- Mark and cut the slit on the front yoke. Cut a bias strip for finishing the back slit, with a length equal to double the slit length + 4 cm and a width of 5 cm. Press the bias strip in half lengthwise, right side out. Lay out the back yoke along the slit line in a straight line, place the bias strip right side down, aligning the raw edges, and stitch. The seam allowance along the slit length is 0.5 – 0.7 cm, decreasing to 0.2 cm at the bottom of the slit. Fold the bias strip to the wrong side, enclosing the seam, and topstitch in the ditch of the attaching seam.
- Stitch the shoulder seams of the back and front yokes, press seam allowances towards the back and serge.
- Place collar pieces in pairs right sides together and stitch the outer edge. Start and end the stitching strictly at the marked collar insertion line. Clip seam allowances at curves, turn the collar right side out, and press. Attach the upper collar to the neckline, press seam allowances towards the collar. Fold the seam allowance of the lower collar inwards and topstitch in the ditch of the attaching seam.
- Cut a bias strip 2.5 cm wide and 10 cm long for the rouleau loop. Fold the strip in half lengthwise, right sides together, and stitch 0.3 cm from the fold. Trim seam allowances close to the stitching, turn the strip right side out, and shape the rouleau. Adjust the loop length. Sew the loop to the left side of the back yoke. Sew a button to the right side.
- Stitch along the upper edges of the back and front with a loosened upper thread and gather. Attach the back and front to the yokes, press seam allowances upwards and serge.
- Stitch the side seams, press seam allowances towards the back and serge.
- Stitch along the upper edge of the lower sleeve with a loosened upper thread and gather. Stitch the upper and lower sleeve parts together, press seam allowances upwards and serge.
- Serge the sleeve edges separately. Stitch the sleeve seam from the armhole to the slit mark, press seam allowances open. Topstitch the slit 0.1 cm from the fold. Set the sleeves into the armholes, press seam allowances and serge. Stitch along the lower edge of the sleeve with a loosened upper thread and gather.
- Fold the cuff in half lengthwise, right sides together, and stitch the side seams. Turn the piece right side out, and press. Attach the outer side of the cuff to the sleeve, fold the seam allowance of the inner side of the cuff inwards and topstitch in the ditch of the outer cuff attaching seam.
- Fold the bottom hem of the garment inwards by 1 cm, then by 1.5 cm and topstitch.
- Make buttonholes and sew on buttons on the cuffs.
