Cropped Sleeveless Draped Neck Top

Fitted Vest with Draped Voluminous Collar and Sculpted Silhouette

Introducing a pattern for a fitted sleeveless vest featuring a voluminous draped collar, contoured panel shaping, and a clean cropped silhouette — Fluid Draping with a Bold, Feminine Statement.

When To Wear

This vest is designed as a standalone statement garment, suitable for:

Evening & Occasion Wear
A striking piece ideal for nights out, events, or elevated styling.

Contemporary Fashion Styling
Perfect as a fashion-forward top paired with trousers, denim, or skirts.

Statement Minimal Looks
Designed to stand on its own without layering, allowing the draped collar to define the entire look.

Key Design Features

Silhouette
Fitted, waist-shaped silhouette with a cropped length that emphasizes the waistline.

Collar
Voluminous draped collar forming soft cascading folds at the front, creating a bold focal point.

Closure
Invisible zipper closure, maintaining a clean and uninterrupted front.

Armholes
Sleeveless construction with precisely finished armholes for a sharp, clean edge.

Back
Contoured back panels with a center back seam and waist darts ensuring a close, structured fit.

Construction
Engineered balance between structured body panels and fluid draping at the neckline.

Level Of Difficulty

Intermediate to Advanced. Requires precision in panel assembly and careful control of draped collar shaping.

Fabric Recommendations

Choose fabrics that balance structure with fluid drape:

• Suiting fabrics from natural or blended fibers

These materials support the fitted base while allowing the collar to fall softly and naturally.

Additional Supplies

• Lining fabric
• Invisible zipper

Cutter’s Must

From Main Fabric:

1. Back – 2 pieces
2. Front – 2 pieces
3. Collar – 2 pieces

From Lining Fabric:

1. Back – 2 pieces
2. Front – 2 pieces

Important Information

Before cutting your fabric:

• Print and lay out pattern pieces to determine yardage.
• Check mirrored pieces, notches, and grainlines.
• For patterned fabrics, align carefully for symmetry.

Assembly Instructions

1. Back

Stitch the darts on the Back pieces.
Trim the dart intake and press toward the center.

Stitch the center back seam from the top to the zipper marking.
Press the seam allowances open.

Insert the zipper.
(The slider of the closed zipper should be positioned at the bottom.)

2. Front

Stitch the darts on the Front pieces.
Trim the dart intake and press toward the center.

Stitch the center front seam.
Press the seam allowances open.

3. Shoulder and Side Seams

Stitch the shoulder and side seams.
Press the seam allowances open.

4. Collar

Place the Collar pieces right sides together and stitch along the outer edge.

Turn the collar right side out and press.

Place the left collar over the right and secure along the lower edges.

Attach the collar to the neckline, clipping seam allowances at the corner.

Press the seam allowances toward the main garment.

5. Hem

Press the hem of the vest to the wrong side.

6. Lining

Stitch the seams of the lining in the same way as the main garment, leaving an opening in the left side seam.

Attach the lining to the neckline.

Finish the armholes in two steps: first the front armhole, then the back armhole.

Attach the lining to the hem of the vest.

Attach the lining to the zipper tape.

7. Finishing

Turn the vest right side out through the opening.

Close the opening.