Cropped Sleeveless Draped Neck Top

Fitted Vest with Draped Voluminous Collar and Sculpted Silhouette

Introducing a pattern for a fitted sleeveless vest featuring a voluminous crossover draped collar, dart shaping, full lining and a clean cropped silhouette — Fluid Draping with a Bold, Feminine Statement.

When To Wear

This vest is designed as a standalone statement garment, suitable for:

Evening & Occasion Wear
A striking piece ideal for nights out, events, or elevated styling.

Contemporary Fashion Styling
Perfect as a fashion-forward top paired with trousers, denim, or skirts.

Statement Minimal Looks
Designed to stand on its own without layering, allowing the draped collar to define the entire look.

Key Design Features

Silhouette
Fitted, waist-shaped silhouette with a cropped length that emphasizes the waistline.

Collar
Voluminous two-part collar, left side crossed over right, forming soft folds around the neck and a V at the front, creating a bold focal point.

Closure
Invisible zipper in the lower part of the center back seam (opens from the hem), maintaining a clean and uninterrupted front.

Armholes
Sleeveless construction with lining-finished armholes for a sharp, clean edge.

Back
Center back seam and back darts ensuring a close, structured fit.

Construction
Fully lined body with a center front seam and front darts, balanced by fluid draping at the neckline.

Level Of Difficulty

Intermediate to Advanced. Requires precision in dart and lining assembly, zipper insertion and careful control of draped collar shaping.

Fabric Recommendations

Choose fabrics that balance structure with fluid drape:

• Suiting fabrics from natural or blended fibers

These materials support the fitted base while allowing the collar to fall softly and naturally.

Additional Supplies

• Lining fabric
• Invisible zipper

Cutter’s Must

From Main Fabric:

1. Back – 2 pieces
2. Front – 2 pieces
3. Collar – 2 pieces

From Lining Fabric (cut from the main Back and Front pattern pieces):

1. Back – 2 pieces
2. Front – 2 pieces

Important Information

Before cutting your fabric:

• Print and lay out pattern pieces to determine yardage.
• Check mirrored pieces, notches, and grainlines.
• For patterned fabrics, align carefully for symmetry.

Assembly Instructions

1. Back

Stitch the darts on the Back pieces.
Trim the dart intake and press toward the center.

Stitch the center back seam from the top down to the zipper marking.
Press the seam allowances open.

Insert the invisible zipper into the lower part of the seam.
(The slider of the closed zipper should be positioned at the bottom.)

2. Front

Stitch the darts on the Front pieces.
Trim the dart intake and press toward the center.

Stitch the center front seam.
Press the seam allowances open.

3. Shoulder and Side Seams

Stitch the shoulder and side seams.
Press the seam allowances open.

4. Collar

Fold each Collar piece right sides together and stitch along the outer edge.

Turn the Collar pieces right side out and press.

Lap the left Collar piece over the right one and baste them together along the lower edges.

Stitch the collar into the neckline, clipping the seam allowances into the corner.

Press the seam allowances toward the main garment.

5. Hem

Press the hem of the vest to the wrong side.

6. Lining

Stitch the seams of the lining in the same way as the main garment, leaving an opening in the left side seam.

Stitch the lining to the neckline.

Stitch the lining to the vest along the armholes in two steps: first the front armhole, then the back armhole.

Stitch the lining to the vest hem.

Stitch the lining to the zipper tape.

7. Finishing

Turn the vest right side out through the opening.

Stitch the opening closed.