Revere Collar Button Front Blouse

Name: Revere Collar Button Front Blouse
Brand: Minerva Patterns
SKU: 2471
Price: 5.00 EUR
Availability: InStock

Pattern #2471

A women's long-sleeved blouse with a revere collar cut in one with the fronts, a button front, a back yoke with pleats below it and pleated sleeves finished with bound slits and buttoned cuffs. Drafted to your own measurements. Recommended fabric: blouse fabrics of natural or blended fibres.

Tech. Description

Revere Collar Blouse

A women's long-sleeved blouse with a revere collar cut in one with the fronts, a button front, a back yoke with pleats below it and pleated sleeves finished with bound slits and buttoned cuffs.

When To Wear

At the office with trousers or a straight skirt, worn tucked in or loose.
Under a cardigan or jacket in spring and autumn, with the collar laid over the jacket lapels.

Key Design Features

Silhouette: Straight, hip-length, with front darts where the size requires them.

Collar: Revere collar cut in one with the front and the front facing, joined by a centre back collar seam and set into the back neckline together with the shoulder seams; it opens into a V-neckline.

Front: Single-breasted button closure, buttonholes on the right front, with interfaced front facings and a back neck facing.

Sleeves: Long set-in sleeves with a slit bound with a 4 cm bias strip of the main fabric, pleats turned away from the opening at the lower edge and a buttoned cuff.

Back: One piece cut on the fold, with pleats at the upper edge turned towards the centre, set into a double back yoke.

Finishing: Side and sleeve seams overlocked and pressed towards the back; hem turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. A cut-on collar set in at the shoulder corners, a double yoke enclosing the back, bound sleeve slits and cuffs topstitched in the ditch.

Fabric Recommendations

Blouse fabrics of natural or blended fibres.

Additional Supplies

Fusible interfacing (cuffs, front facings, back neck facing)
6 buttons

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: all seams 1 cm. Hem allowance – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:
- Back - 1 piece on fold
- Back yoke – 2 pieces
- Front – 2 pieces
- Sleeve – 2 pieces
- Cuff – 2 pieces
- Front facing — 2 pieces
- Back neckline facing — 1 piece
From fusible interfacing:
- Cuff – 2 pieces
- Front facing — 2 pieces
- Back neckline facing — 1 piece

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

Interface the pieces with fusible interfacing.
At the upper edge of the back, create and secure pleats, with depths directed towards the center. Fold the back yokes right sides together and stitch the lower edge, inserting the back piece. Turn the yokes upwards and press. Then treat the yokes as one piece.
Stitch the darts on the front pieces (if provided for the size). Press the depths upwards.
Stitch the center seam of the integrated collar. Clip the shoulder seam allowance at the corner. Stitch the shoulder seams, simultaneously attaching the collar to the neckline. Clip and press the allowances.
Stitch the center seam of the collar on the front facing pieces. Press the allowance open. Stitch the shoulder seams of the facing and front facing, simultaneously attaching the collar to the neckline. Serge the outer edge. Fold the upper and front facing right sides together and stitch along the front edge and collar. Clip the allowances, trim at corners, turn the front facings to the wrong side and press.
Stitch the side seams. Serge the allowances and press towards the back.
Make a slit on the sleeve along the marked line. Cut a bias binding from the main fabric, 4 cm wide and with a length equal to twice the slit length + 4 cm. Fold the binding in half lengthwise and press. Press the outer allowances towards the center. Finish the sleeve slit with bias binding. Create and secure pleats on the sleeve. Depths are directed away from the closure.
Stitch the sleeve seam. Serge the allowance and press towards the back. Set the sleeves into the armholes. Serge the allowance and press.
Fold the cuff pieces in half lengthwise, right sides together, and stitch the side edges. Start and end the stitching exactly at the marked seam line for attaching the cuff. Turn the piece right side out, press. Attach the outer side of the cuff to the sleeve, fold the allowance of the inner side of the cuff inwards and topstitch into the seam of the outer cuff attachment.
Serge the lower edge of the garment. Press the allowances to the wrong side and topstitch.
Make buttonholes on the right front and cuffs. Sew buttons on the left front and cuffs.