Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's pullover blouse with a V-neck, short cut-on cap sleeves and an inverted pleat at the centre front stitched down for 5–6 cm below the V. Pleats on the front shoulder edges are turned toward the neckline. Drafted to your own measurements. Recommended fabric: blouse fabrics of natural or blended fibres.
A women's pullover blouse with a V-neck, short cut-on cap sleeves and an inverted pleat at the centre front stitched down for 5–6 cm below the V. Pleats on the front shoulder edges are turned toward the neckline.
Silhouette: Loose, straight body with fullness released below the stitched pleat.
Length: To the hip, with a curved hem.
Neckline: V-neck at the front, round at the back; finished with interfaced facings topstitched to the blouse 1 cm from their outer edge.
Sleeves: Short cap sleeves cut in one with the front and back; no armhole seam.
Front: One piece cut on the fold, with an inverted pleat at the centre front and pleats on the shoulder edges, their depths turned toward the neckline. No closure.
Back: One piece cut on the fold, with no seams or darts.
Finishing: Shoulder and side seams pressed toward the back and overlocked; sleeve and lower hems overlocked, turned under and topstitched.
Beginner. Two main pieces; the only shaping is folding and stitching pleats, plus a faced neckline.
Blouse fabrics of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: hem and sleeve hem – 1.2 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!
Minerva Support
Online
