Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#6064
#6066

Long Double-breasted Shearling Coat

Pattern #6065

A men's long double-breasted coat for fur or shearling, with a collarless V-neck, a four-button front and in-seam pockets. Unlined: all seams are sewn fur sides together, so the seam allowances stay on the suede outer side as a design detail. Drafted to your own measurements. Recommended fabric: faux fur or natural fur (shearling).

Tech. Description

Long Double-breasted Shearling Coat

A men's long double-breasted coat for fur or shearling, with a collarless V-neck, a four-button front and in-seam pockets. Unlined: all seams are sewn fur sides together, so the seam allowances stay on the suede outer side as a design detail.

When To Wear

  • In winter as a warm outer coat over suits and heavy knitwear.
  • With jeans or wool trousers and boots for everyday wear in the cold months.

Key Design Features

Silhouette: Straight, shaped only by vertical panel seams at the front and back.

Length: Below the knee.

Neckline: Collarless V-neck; the upper front edges turn back slightly, showing the fur side.

Sleeves: Set-in sleeves, each cut in two halves (left and right parts) joined by a lengthwise seam; shown with the hems turned up to the fur side.

Front: Double-breasted, four buttons in two pairs. Each front is made of four panels: upper and lower centre front, upper and lower side front.

Pockets: In-seam pockets in the horizontal seam between the upper and lower side front panels; the pocket bag is cut from the main fabric.

Back: Centre back seam and side back panels.

Finishing: Pile caught in the seams is picked out with a needle; buttonholes are reinforced with small squares of fur stitched to the wrong side.

Lining: Unlined.

Level Of Difficulty

Intermediate. Few pieces and no lining, but the coat is sewn in fur or shearling with exposed seam allowances, in-seam pockets and buttonholes cut through reinforced fur.

Fabric Recommendations

Faux fur or natural fur (shearling).

Additional Supplies

  • 4 buttons

Cutter's Must

  • From main fabric:
  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Side Upper Front – 2 pieces
  • Side Lower Front – 2 pieces
  • Upper Center Front – 2 pieces
  • Lower Center Front – 2 pieces
  • Pocket – 2 pieces
  • Left Sleeve – 2 pieces
  • Right Sleeve – 2 pieces
  • Small squares of fur to reinforce the buttonholes – 4 pieces

Sewing Instructions

  1. Stitch all pieces with fur sides facing inward so that the seam allowances are on the suede face side!
  2. Stitch the Center Back pieces together. Carefully pull out the pile caught in the seam with a needle.
  3. Stitch the Center Back to the Side Back pieces; pull out the pile.
  4. Stitch the Upper Center Front to the Lower Center Front.
  5. Place each Pocket on a Side Lower Front, fur sides together, and stitch along the upper edge, stopping 1 cm from the ends.
  6. Place the Side Lower Front onto the Side Upper Front and stitch the Pocket to the Side Upper Front without catching the Side Lower Front.
  7. Stitch the side front panels to the center front panels without catching the pocket bag.
  8. Stitch the shoulder and side seams.
  9. Stitch the Left Sleeve and Right Sleeve parts of each sleeve together.
  10. Set the sleeves into the armholes.
  11. For each buttonhole, place a small square of fur on the wrong side and stitch it, forming a small rectangle for the buttonhole.
  12. Cut open the buttonholes without damaging the stitching.
  13. Sew on the buttons.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?