Ruffled V-neck Blouse with Bow Tie

CUTTER'S MUST

• From main fabric:
1. FRONT PANEL – 2 QTY
2. BACK PANEL – 2 QTY
3. SLEEVE – 2 QTY
4. COLLAR – 2 QTY
5. TRIM STRIP – 2 QTY
• From FUSIBLE INTERFACING: integrated front facing, upper COLLAR.

Sewing Instructions

1. Reinforce the integrated front facings and COLLAR with FUSIBLE INTERFACING.
2. Stitch the waist darts on the BACK PANEL and FRONT PANEL. Press the dart folds towards the center.
3. Stitch the center back seam. Press SEAM ALLOWANCES to the left side and overcast.
4. Stitch the shoulder seams. Press SEAM ALLOWANCES towards the BACK PANEL and overcast.
5. Stitch the side seams. Press SEAM ALLOWANCES towards the BACK PANEL and overcast. Overcast the bottom edge of the blouse.
6. Cut a drawstring 2 – 2.5 cm wide. Fold it in half lengthwise, right sides out, and press. Unfold, press the side edges towards the center, and fold in half again. Stitch 0.1 cm from the edge.
7. Press the neckline TRIM STRIP in half lengthwise, right sides out. Place the TRIM STRIP on the neckline and stitch, leaving an opening between the NOTCHES. Overcast the seam allowances.
8. Press the integrated front facing along the marked line to the wrong side. Fold the facing along the edge line to the right side and stitch the upper and lower corners. Turn the facing to the wrong side and press.
9. Direct the overcast seam of the TRIM STRIP attachment towards the armhole of the FRONT PANEL and topstitch onto the FRONT PANEL 0.1 cm from the inner edge, forming a casing. Insert the drawstring into the opening.
10. Place the COLLAR pieces right sides together and stitch along the outer contour, starting and ending the stitching exactly at the COLLAR attachment line. Clip the SEAM ALLOWANCES at the corners, turn the COLLAR to the right side, and press. Attach the outer COLLAR to the neckline, starting from the neckline TRIM STRIP. Fold under the open edge of the inner COLLAR and topstitch into the attachment seam, securing the drawstring tail with a stitch.
11. Along the SLEEVE cap from NOTCH to NOTCH, stitch with loosely tensioned stitches and gather. Overcast the bottom edge of the SLEEVE. Fold the SEAM ALLOWANCE inwards and stitch two parallel lines using elastic thread, 1 cm and 1.5 cm from the edge. Clip the armhole SEAM ALLOWANCES at the NOTCHES, attach the SLEEVES to the armhole, and overcast the SEAM ALLOWANCES. Overcast the SEAM ALLOWANCES of the lower part of the armhole, fold inwards, and topstitch.
12. Fold the bottom edge of the blouse to the wrong side and topstitch.
13. On the right FRONT PANEL, overcast the buttonholes. On the left FRONT PANEL, sew on the buttons.