Pattern

CUTTER'S MUST

• From main fabric:
1. BACK PANEL - QTY 2
2. FRONT PANEL SIDE PANEL – QTY 2
3. FRONT PANEL CENTRAL PART – QTY 2
• From LINING fabric:
1. BACK PANEL - QTY 2
2. FRONT PANEL SIDE PANEL – QTY 2
3. FRONT PANEL CENTRAL PART – QTY 2

Sewing Instructions

1. Stitch the center back seam from the mark downwards. Press the seam open, pressing the SEAM ALLOWANCE for the fastener.
2. Place the ZIPPER under the SEAM ALLOWANCES so that the teeth are not visible, and stitch it in place.
3. Stitch the FRONT PANEL SIDE PANEL to the FRONT PANEL CENTRAL PART. Press the SEAM ALLOWANCES towards the SIDE PANEL. Stitch the center edge of the FRONT PANEL. Press the SEAM ALLOWANCES open.
4. Stitch the side and shoulder seams of the dress. Press the shoulder and side seams towards the BACK PANEL.
5. Stitch the LINING pieces similarly to the main fabric pieces. Place the LINING and the dress right sides together and stitch the neckline, clip the SEAM ALLOWANCES at the curves.
6. Stitch the armhole in two steps: the FRONT PANEL section from the shoulder seam to the side seam, then the BACK PANEL section from the shoulder seam to the side seam. Clip the SEAM ALLOWANCES at the curves. Turn the dress right side out, baste and press the neckline and armholes.
7. Along the bottom edge of the dress made from the main fabric, stitch with loosened stitches, gather slightly. Place the bottom edges of the dress and LINING right sides together, pull through the unstitched section under the LINING fastener, align the edges and stitch the bottom of the dress.
8. Turn the dress right side out, sew the SEAM ALLOWANCES of the opening for the fastener on the LINING to the ZIPPER tape.