Shearling Jacket Asymmetrical Fur Collar

Name: Shearling Jacket Asymmetrical Fur Collar
Brand: Minerva Patterns
SKU: 5708
Price: 5.00 EUR
Availability: InStock

Pattern #5708

A hip-length women's sheepskin jacket with an asymmetric wrap front, a fur shawl collar, a front yoke and princess-line panels, fastened with two buckled straps. Two-piece sleeves end in cuffs worn fur side out. Drafted to your own measurements. Recommended fabric: sheepskin (shearling) for the jacket and cuffs; fur for the collar.

Tech. Description

Shearling Jacket Asymmetrical Fur Collar

When To Wear

In autumn and winter over knitwear, with jeans or slim trousers.
Over dresses and skirts with boots in cold weather.

Key Design Features

Silhouette: Fitted, shaped by princess seams front and back.

Length: Hip length; the overlapping front edge curves into the hem.

Collar: Shawl collar cut from fur, attached along the neckline and the overlapping front edge down to the fastening.

Front: Asymmetric wrap front: a yoke joined to the centre lower front, and a side front panel joined with a lapped seam. Two buckled straps fasten the overlap.

Sleeves: Two-piece set-in sleeves, the front seam lapped; cuffs attached with a closed seam so the fur side shows.

Back: Centre back seam, topstitched on both sides, and lapped princess seams.

Finishing: Lapped seams and open seams with both allowances topstitched, as used for sheepskin. Front edges, hem and cuff edges are stitched 0.1–0.2 cm from the edge, with a second row of topstitching 2 cm from the edge along the front edges and hem. No lining.

Level Of Difficulty

Advanced. Sewing sheepskin with lapped and topstitched open seams, joining fur cuffs with closed seams and setting a fur collar into an asymmetric wrap front.

Fabric Recommendations

Sheepskin (shearling) for the jacket and cuffs; fur for the collar.

Additional Supplies

2 buckles

Cutter's Must

From main material (sheepskin):

Side Front – 2 pieces
Side Back – 2 pieces
Center Back – 2 pieces
Front Yoke – 2 pieces
Center Lower Front Part – 2 pieces
Upper Sleeve – 2 pieces
Lower Sleeve – 2 pieces
Cuff – 2 pieces

From trim material (fur):

Collar – 1 piece

Sewing Instructions

Stitch the Front Yoke to the Center Lower Front Part. Spread the seam allowances open and topstitch.
Join the Side Front to the Center Lower Front Part with a lapped seam.
Stitch the back princess seams (Center Back to Side Back) with a lapped seam.
Stitch the center back seam. Press seam allowances open and topstitch.
Stitch the shoulder and side seams of the jacket. Spread the seam allowances open and topstitch.
Stitch the front seam of the sleeve (Upper Sleeve to Lower Sleeve) with a lapped seam. Place the sleeve and Cuff together, fur sides inwards, and attach the cuff to the sleeve with a closed seam (trim the cuff allowance and topstitch the sleeve allowance). Stitch the elbow seam of the sleeve. Near the cuff attachment seam, clip the elbow seam allowances and topstitch them onto the cuff with a closed seam.
Set the sleeves into the armholes according to the notches. Clip the seam allowances, spread them to both sides of the seam and topstitch: sleeve allowance - onto the sleeve, armhole allowance - onto the back and front.
Attach the Collar to the jacket.
Stitch a securing line 0.1 - 0.2 cm from the edge along the front opening, hemline, and cuff edge. Sew on the buckles. Stitch a decorative line 2 cm from the edge along the front opening and hemline.