Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5530
#5532

A-Line Mini Dress with Ribbon Bows

Pattern #5531

A sleeveless women's A-line dress above the knee, with a scoop neckline, a deep U-shaped low back and satin ribbons topstitched along the seams and across the front, finished with two tied bows at the centre front. Invisible zip in the centre back seam. Drafted to your own measurements. Recommended fabric: fabrics of natural or blended fibres.

Tech. Description

Bow Embellished Mini Dress

A sleeveless women's A-line dress above the knee, with a scoop neckline, a deep U-shaped low back and satin ribbons topstitched along the seams and across the front, finished with two tied bows at the centre front. Invisible zip in the centre back seam.

When To Wear

  • Summer parties, birthdays and evening dates.
  • Warm days with sandals; with a cardigan or jacket in spring.

Key Design Features

Silhouette: Fitted bodice with bust darts in the front yoke, joined to an A-line skirt.

Length: Above the knee; hem overlocked, turned up and topstitched 1.5 cm from the edge.

Neckline: Scoop neckline at the front; deep U-shaped low back. Neckline, armholes and back opening are overlocked, turned to the inside and topstitched 0.5 cm from the edge.

Sleeves: Sleeveless, with wide shoulder straps; shoulder seam position is checked at a fitting.

Front: Front yoke with bust darts, a middle front section and a one-piece front skirt. Satin ribbon runs across the middle front under the bust, over the seam joining the bodice to the skirt, and diagonally from the centre front down to the side seams; two ribbon bows are tied at the centre.

Back: Upper back and back skirt in two halves with a centre back seam and an invisible zip. One ribbon runs across the lower edge of the low back, a second covers the seam between the upper back and the back skirt.

Finishing: Seams overlocked; side and shoulder seams pressed towards the back.

Level Of Difficulty

Beginner. Straight seams, bust darts, an invisible zip and turned-and-topstitched edges; the ribbon trim needs careful placement and even topstitching.

Fabric Recommendations

Fabrics of natural or blended fibres.

Additional Supplies

  • Satin ribbon
  • Invisible zip

Cutter's Must

  • From main fabric:
  • 1. Upper Back – 2 pieces
  • 2. Back Skirt – 2 pieces
  • 3. Front Yoke – 1 piece
  • 4. Middle Front – 1 piece
  • 5. Front Skirt – 1 piece

Sewing Instructions

  1. Tip: Confirm the placement of the shoulder seams during fitting.
  2. Mark and stitch the bust darts on the front yoke. Press the bust darts downwards.
  3. Attach the front yoke to the middle front. Overlock the seam and press it towards the front yoke. Topstitch satin ribbon onto the front bodice and the front skirt (according to the technical drawing).
  4. Attach the front bodice to the front skirt. Overlock the seam and press it towards the front skirt.
  5. Attach the upper back to the back skirt. Overlock the seam and press it towards the back skirt.
  6. Topstitch satin ribbon over the seam joining the back skirt and the upper back. Topstitch satin ribbon over the seam joining the front skirt and the front bodice. Topstitch ribbon onto the upper back from the notch to the lower edge of the back low-cut neckline (according to the technical drawing).
  7. Stitch the side and shoulder seams of the dress. Overlock the side and shoulder seams and press them towards the back.
  8. Overlock the edges: front and back neckline, front and back armholes, and the back low-cut neckline. Fold the seam allowances to the wrong side of the dress, press without stretching, and topstitch 0.5 cm from the edge.
  9. Overlock the center back edges. Stitch the center back seam up to the zipper notch and press it open, also pressing the zipper opening allowances. Insert the invisible zipper.
  10. Overlock the bottom edge of the dress, fold up and topstitch 1.5 cm from the bottom edge. Tie the decorative bows on the front.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?